MFP crank support??

4sdvenom

Never Enough!
Established Member
Joined
Dec 2, 2003
Messages
2,439
Location
Ft. Wayne, IN
I’ve heard it mentioned before unless I misunderstood that MFP has a crank support for the 03-04 Cobras. So far I haven’t been able to find anything on it, only supports for the 5.0 Coyotes. I haven’t even been able to find a way to contact them (I don’t have Facebook). Does Anyone know if they have one out yet and if it’s available? Also a way to contact them without using Facebook?
Thanks
Ken
 

4sdvenom

Never Enough!
Established Member
Joined
Dec 2, 2003
Messages
2,439
Location
Ft. Wayne, IN
Lethal has the MFP 5.0 crank support on their site but the only one they have for the 03-04 Cobras is the J2Fab support.
Unless they just haven’t updated their site which is slim.
 

UnrealSVT

Active Member
Established Member
Joined
Mar 19, 2009
Messages
585
Location
WV/PA
I had also heard of this being in the works for 03/04 Cobras. I heard this back pre-covid, but haven't heard of any progress for a while...

Sent from my SM-G975U using Tapatalk
 

03cobra#2

Hobbyist Of Many Hobbies
Established Member
Joined
Feb 9, 2007
Messages
1,519
Location
Cleveland, Ohio
Would this be better then what J2fab has? Seems they are about the same price.

Sent from my Pixel 2 XL using Tapatalk
 

4sdvenom

Never Enough!
Established Member
Joined
Dec 2, 2003
Messages
2,439
Location
Ft. Wayne, IN
Would this be better then what J2fab has? Seems they are about the same price.

Sent from my Pixel 2 XL using Tapatalk
Where did you find a price for the MFP? I was hoping it would be a bit less. I’ve seen their crank support for the 5.0 Coyote listed for about $850 and was hoping the 03-04 Cobra would be about the same and in stock. Haven’t found the J2Fab support in stock so far. J2Fab shows it as out of stock and doesn’t even say available on back order as some of the other items on his list and Lethal never replied to me when I asked if they had any in stock.
 

03cobra#2

Hobbyist Of Many Hobbies
Established Member
Joined
Feb 9, 2007
Messages
1,519
Location
Cleveland, Ohio
Where did you find a price for the MFP? I was hoping it would be a bit less. I’ve seen their crank support for the 5.0 Coyote listed for about $850 and was hoping the 03-04 Cobra would be about the same and in stock. Haven’t found the J2Fab support in stock so far. J2Fab shows it as out of stock and doesn’t even say available on back order as some of the other items on his list and Lethal never replied to me when I asked if they had any in stock.
I just had done a quick search and found this. Which is about what the cost of the J2fab piece is without the balancer. I ordered mine from Lethal last week (and received it on Friday), when I called them they said they had a couple in stock....again that was last week. It would be great to have a 2nd option for a crank support. I look forward to putting mine on next week.
cb050a8a13ddc5465fb759727e48e556.jpg


Sent from my Pixel 2 XL using Tapatalk
 

gtmustang00

Well-Known Member
Established Member
Joined
Nov 12, 2003
Messages
1,584
Location
NH
I message MFP every few months. They still tell me it is in the works. Been a year since I started asking though.
 

03cobra#2

Hobbyist Of Many Hobbies
Established Member
Joined
Feb 9, 2007
Messages
1,519
Location
Cleveland, Ohio
I installed the j2fab unit and is a nice setup. I ordered from lethal and was able to confirm they had in stock first so it shipped immediately.
 

Blackedout

Well-Known Member
Established Member
Joined
Sep 8, 2010
Messages
1,299
Location
NY
I picked up a J2 support this summer and installed... Very nice piece... a bit pricey !! We’ll see how it holds up..
 

Attachments

  • 20BC9BB2-66A2-4532-9555-77A98CA2E8E2.jpeg
    20BC9BB2-66A2-4532-9555-77A98CA2E8E2.jpeg
    137 KB · Views: 105

4sdvenom

Never Enough!
Established Member
Joined
Dec 2, 2003
Messages
2,439
Location
Ft. Wayne, IN
I picked up a J2 support this summer and installed... Very nice piece... a bit pricey !! We’ll see how it holds up..
Any chance you could get a picture or measurement of the distance between the front of the supercharger crank pulley and the front support plate? Trying to see if it will clear a Metco 10 rib crank pulley set up.

Thanks
Ken
 

Blackedout

Well-Known Member
Established Member
Joined
Sep 8, 2010
Messages
1,299
Location
NY
I believe his site says a 10 rib will clear and up to a 4 lb lower... I’ll try and get a pic/measurement for you tomorrow..
 

Blackedout

Well-Known Member
Established Member
Joined
Sep 8, 2010
Messages
1,299
Location
NY
Here is a pic... the measurement is from the face of the IW balancer... not the face of the lower Ring..
 

Attachments

  • AC384B04-E75A-4D80-A31A-61CB31F96E2E.jpeg
    AC384B04-E75A-4D80-A31A-61CB31F96E2E.jpeg
    60 KB · Views: 71

Users who are viewing this thread



Top