Meth Injection PD Blower Coyote

RDB1000

New Member
Joined
Dec 11, 2018
Messages
1
Location
UK
Hey everyone

I have a 2011 Mustang GT 5.0 coyote . Currently on a stock motor with a vmp gen3 with a 85mm pulley (13psi) which made 757hp 595ibft on 99octane fuel with octane booster (im from the UK so our fuel terminology is different here ) I think our 99 octane is your 93 ....end of Jan am upgrading to a gen2 shortblock with headstud kit and valve springs with jlt 148mm and kb 168mm TB and i plan to run a 79mm pulley (15psi) . once the motor is upgraded i plan to use the ALKY controls twin nozzle kit that i bought to give me enough "octane" to safely use the 79mm pulley and to be able to make 850 - 900 hp . Ive seen a guy on here called Willie post with a 5 nozzle spray system but my question is will my twin nozzle set up pre throttle body be okay ? I spoke to lund about IAT sensor being pre meth nozzle and they said the intake IAT2 will be there so it will be fine ... is that the case ? Thankyou . Ross
 

Users who are viewing this thread



Top