m122/GT500 adapter plate kits

[tgarlock]

I sold out my first run of plates so I am going to make 5 more. What you get is them122/gt500 adapter plates and throttle body adapters complete all the bolts and gasketing material needed (o-rings). This adapter plate will allow you to bolt any stock m122, or replacement gt500 blower (2.3tvs, 2.9 whipple etc.) onto a lightning midplate (adapters are drilled for all years midplates, 99-00 and 01-04). The "kit" will include the following:
1 - m122 adapter plate made from 6061-t651 aluminum, 1", thick with o-ring gasket
8 - m10-1.5x80mm bolts to hold adapter to stock midplate
10 - 5/16-18x1.5" bolts to hold m122/gt500 blower to adapter
1 - throttle body adapter to mount lightning throttle body to gt500 elbow, 1" thick, with o-ring gasket
2- m6-1.0x55mm bolts to hold tb and adapter to gt500 elbow
2 - m6-1.0x35mm bolts to hold adapter to elbow
2 - 1/4-20x1.125" bolts to hold tb to adapter
1 - Cobra engineering IAC adapter plate
Cost is $565 shipped (money sent via paypal for goods)
CONTACT INFO: [email protected]
Pictures:

 

[travis.wood12]

How many do you still have left?

 

[tgarlock]

How many do you still have left?

5 left. A money order has supposedly been sent, but until its received nothing is reserved, if it does arrive there will be 4 left.

Tyler

 

[99cobraUgotbit]

Are you going to make more down the road? I have an m122 off my GT500 that I wanna swapp to eventually but I daily drive my lightning and its a company vehicle. If not I might have to talk my business partner into funding the swap for "business purposes" lol

 

[tgarlock]

I can make more as orders are placed, the price might be about 100 higher because the current pricing is based on an order quantity of 10.

By the way, only 2 plates left.

 

[99cobraUgotbit]

That's good to know. I will be down to swap out maybe summertime this year. If my company explodes financially then sooner. Really nice kit!!!

What are your mods on the Lightning?

 

[tgarlock]

That's good to know. I will be down to swap out maybe summertime this year. If my company explodes financially then sooner. Really nice kit!!!

What are your mods on the Lightning?

Last time the truck was on the dyno and made 427/497 it had the m122, a 4lb lower, ba2400 MAF, and a bassani cat back.

It now has jba shortie headers, bassani catless mids, and a 2600 stall converter.

 

[ssvvtt]

Any pics installed?

 

[tgarlock]

Any pics installed?

plate installed:

with blower:

 

[lightningmanny]

whats goign on with the plates any up dates

 

[ssvvtt]

Hate to ask but save me the search time. What's the benefit of going with gt500 charger over stocker? More hp per boost? Can they handle more than a L eaton?

 

[tgarlock]

whats goign on with the plates any up dates

I have 2 plates left to sell. If someone is interested in a complete kit, i can source a GT500 blower, combine it with a plate kit, and build a CAI for it.

Hate to ask but save me the search time. What's the benefit of going with gt500 charger over stocker? More hp per boost? Can they handle more than a L eaton?

The plate offers a couple things. 1. you can use a gt500 m122 which is larger and more efficient than the m112 on the L. 2. once the plate is on the engine, any GT500 upgrade blower can be used, such as the frpp tvs2300, vmp 2300, 2.9 whipple etc.

 

[tgarlock]

Bump, sold out of my first batch of 10, making 5 more.

Tyler

 

[01GT5.4]

When will they be available again?

 

[Oceanside78]

Is there anything needed to be done outside of this adapter+blower i.e. sensors/reworking vacuum lines? Thanks

 

[lucheski]

Im running this blower on my Terminator and made 560rwhp on only 16psi...another guy made 620/660 at 25psi, another made 607rwhp @ 21-22psi

Lots of power potention for the money invested, and have that loud ass eaton whine! I love my m122 setup

 

[99cobraUgotbit]

Im running this blower on my Terminator and made 560rwhp on only 16psi...another guy made 620/660 at 25psi, another made 607rwhp @ 21-22psi

Lots of power potention for the money invested, and have that loud ass eaton whine! I love my m122 setup

Do you have any pics?

 

[lightningmanny]

Is there anything needed to be done outside of this adapter+blower i.e. sensors/reworking vacuum lines? Thanks

its looks like a custom intake which you need to tap for your pvc and relocate the power steering tank

 

[lightningmanny]

when are the new plates comming in!!!!!!!!!!!!

 

[tgarlock]

when are the new plates comming in!!!!!!!!!!!!

Parts are ready to go. All o-rings have been assembled and installed. All I need to do now is package the parts and they are ready for shipping.