lug nut studs

Dave.O

Active Member
Established Member
Joined
Apr 14, 2014
Messages
502
Location
Houston
searched and found this thread:

https://www.svtperformance.com/threads/arp-wheel-studs.822794/

references using arp 7003 / 7723 or moroso 46180

I would prefer to remain with sock stud length, anybody know where I can find an aftermarket hardened stud of proper length to continue using factory style acorn nuts?

(the local auto stores carry the cheap Chinese ones, of which I broken a few over time, would like to replace all at once and be done)

thanks in advance
 

olympic

Well-Known Member
Established Member
Joined
Dec 28, 2014
Messages
3,509
Location
Canada
I couldn't find any and ended up buying ARP's and shortening them. Use a die grinder with a thin cut-off wheel and and it goes through like butter. Thread an open ended lug nut onto the stud before cutting and it will clean up the threads when you remove it.
 

Dave.O

Active Member
Established Member
Joined
Apr 14, 2014
Messages
502
Location
Houston
Thanks, did you buy the arp 7723 or 7703? (if you recall)


Sent from my iPhone using svtperformance.com
 

olympic

Well-Known Member
Established Member
Joined
Dec 28, 2014
Messages
3,509
Location
Canada
I bought the 7703's but I can't remember why...lol. I did have to drill out the hubs though for proper fitment. Some guys will force them in with a big impact wrench but it mushrooms out the edge of the hole really bad. The 7723 would be a better choice as long as they are long enough for you.
 

Dave.O

Active Member
Established Member
Joined
Apr 14, 2014
Messages
502
Location
Houston
Thanks
That’s the info I was looking for


Sent from my iPhone using svtperformance.com
 

Users who are viewing this thread



Top