Lower Intake Hose?

[GixxerThou_SVT]

I am in the process of swapping out my blower for a ported one, I pulled the lower intake off the car and on the bottom theres a fitting with a hose that Ts into other hoses that go to the valve cover. Can this hose be blocked off? Should I route it to a catch can?

 

[D-MANN]

Plug the lower intake. I believe its a 5/8 plug. Run -10 hose from each VC to a catch can. I used a Moroso catch can

 

[JRS03]

I deleted mine as well. I just use breathers and no catch can

 

[Tractionless1]

I am in the process of swapping out my blower for a ported one, I pulled the lower intake off the car and on the bottom theres a fitting with a hose that Ts into other hoses that go to the valve cover. Can this hose be blocked off? Should I route it to a catch can?

It's for your PCV system and goes to the drivers side valve cover PCV valve. The two member above are recommending deleting the OE system and doing a catch can (post #2) or exposed breather filters (post #3). If you choose either I'd go with catch can as there have been instances of open breathers making a mess of the engine bay.

 

[GixxerThou_SVT]

Bought a Moroso can from a buddy, will delete the system and plug the blower and lower intake hose!