Loose in the turns after install ?

[kyoshosp2]

Installed ford 1.5 drop and bbr lower control arms and White line parn hard bar and lower control arm brackets . Now the rear end seems to wanna come around in a corner .. Like on ice . It's a 2014 brembo car .

 

[Spoolingbyu]

.

 

[KG145.0]

You may be getting what they call rear over steer... as the angle of the lca gets steaper you get more of it...for cornering you want lca more parallel to the road.. but for drags the angle helps for launching... I noticed this in my car when I installed bmr brackets.. the rear seemed to want to come around.. not sliding but felt like quadrastear... this is what a have read atleast

 

[Ron Mexico]

Get some adjustable sway bars and dial them in for your cornering preference.

understeer / oversteer corrections

Also, Steeda's trunk x brace really tightened up my back end...

Steeda 2005-14 Mustang Rear Chassis X-Brace - Made in USA 555-5093 - Free Shipping!

 

[Jabooh1]

What hole do you have your LCA in?

 

[momstmg]

I used the top hole on mine. Also a watts link might also help.

 

[KILRSVT]

I would recheck all the nuts and bolts make sure everything is snug . If it checks out ok install the stock control arms see what happens.