Looking for old owner and history of cobra

[Bogdia]

Same car 13 years ago with KB 2.8.

Maybe be someone will remember

 

[Bogdia]

Time to rebuild the motor

Now looking for an oil pump, what are the differences on this ones in the photo

Melling 10340 vs 10227 vs Boundary 3v

I have an offer to buy a 13340 for a good price
Or Buy Oem HO oil pump on MMR?
Best choice for:
- water pump?
- bearings(crankshaft, rod bearings, piston rings)-rockauto?
- gaskets - rcokauto?
- timing chain kit - ford perfomance M-6004-A464. I saw MMR have a similar kit to M-6004-A464. Is it legit?

Rear diff oem cover replacement to ford performance, benefits?

 

[03cobra#694]

Those are oil pumps.

 

[Bogdia]

Those are oil pumps.

Fixed

 

[03' White Snake]

Stock oil pump with Billet Boundary Gears. When the pump is open to swap the gears, check for any aluminum flashing or high spots inside. Sand them off and good to go.

 

[Bogdia]

Stock oil pump with Billet Boundary Gears. When the pump is open to swap the gears, check for any aluminum flashing or high spots inside. Sand them off and good to go.

I bought boundary oil pump

 

[Bogdia]

After rebuild, can i use orange instead of yellow freeze in the whole system(sc and engine)?

 

[DSG2003Mach1]

Ford's orange antifreeze is not recommended - it tends to gunk up (ford themselves recommend changing it out)

 

[Bogdia]

Ford's orange antifreeze is not recommended - it tends to gunk up (ford themselves recommend changing it out)

U recommend yellow or newest? Do u have code or something?

 

[Bogdia]

Yellow is updated gold?
G = Green-colored engine coolant meeting Ford specification ESE-M97B44-A (Motorcraft® Premium Antifreeze/Coolant)
O = Orange-colored engine coolant meeting Ford specification WSS-M97B44-D or WSS-M97B44-D2 (Motorcraft® Orange Antifreeze/Coolant)
Y = Yellow-colored engine coolant meeting Ford specification WSS-M97B51-A1 (Motorcraft® Gold Antifreeze/Coolant)
DG = Dark green-colored engine coolant meeting Ford specification WSS-M97B55-A

 

[DSG2003Mach1]

ive been putting yellow in everything

 

[vr4]

im using the newest yellow.

 

[Bogdia]

im using the newest yellow.

Do you have oem code or specification code?

 

[vr4]

Do you have oem code or specification code?

VC-13-G is the oem part number for concentrate
VC-13DL-G if you want premix

this is for US. im not sure if itll be the same for your country

 

[Bogdia]

Best bolts for bassani mid length headers? Because work with oem studs on mid length headers is it pain in the ass.

Arp, stage 8,mr gasket?

 

[03' White Snake]

Best bolts for bassani mid length headers? Because work with oem studs on mid length headers is it pain in the ass.

Arp, stage 8,mr gasket?

I run 12.9 M8 x 25 socket head cap screws, zinc plated on mine. I ran black ox but they rusted immediately. The zinc has lasted a few years but are starting to rust again. Not that it matters.

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

I chose the socket head cap screws because using the 6" ball end drivers from HF made installing them a breeze.

3/8 in. Drive Metric Long Reach Ball Hex Socket Set, 7 Piece

Amazing deals on this 7Pc Ball End Long Rch Metric Hex Socket Set at Harbor Freight. Quality tools & low prices.

www.harborfreight.com

 

[Bogdia]

Cobra engineering vs Wonder racing modified secondary chain tensioner?

Which one is better?

I will use the M6004-a464 kit but i want to change the secondary tensioner.

 

[biminiLX]

I’ve used Cobra engineering and Accufab for timing components.
How’s the project going?
-J

 

[Bogdia]

Heads in workshop, i'm waiting for some parts before assembling the motor.

 

[Bogdia]

Cobra engineering vs wonder racing sec. Tensioner? So Which one to choose?