Lets see some 03-04 cobra drag setups

[MG0h3]

How tall bias ply fronts are you all running on a lowered 03 with 17x4.5 rims? 26, 27, 27.5? I don't want to rub thanks.

Curious as well. I cant recall if Im on the HR sport or race springs; pretty sure its race. Not ideal for the strip I know but I saw someone else on the race springs and fit 28" tires in the back.

Anybody else lowered on a drag setup?

 

[tnuce10]

bump

 

[JustaGT5408]

15x8 and 17x4.5 painted racestars

 

[tnuce10]

^^^Do you have any side view pictures of your car? I'd like to see the rear wheels a little better.

They look awesome in the first picture!

 

[bigdave03svt]

TBC_4733 by D.C. 83, on Flickr

 

[lilmarauder]

 

[tinkey61]

How tall bias ply fronts are you all running on a lowered 03 with 17x4.5 rims? 26, 27, 27.5? I don't want to rub thanks.

I was told to try a 27 on the front of my mach 1, but that didn't work out so well. It scrubs pretty bad. Gonna try a 26.

 

[JustaGT5408]

^^^Do you have any side view pictures of your car? I'd like to see the rear wheels a little better.

They look awesome in the first picture!

The only one of the rear I have from the side is one that 1320 took at cash days. I will get some more for ya soon!

 

[kalinnew]

This is a 15x8? whats your backspace?

They stuck out a good bit.. I'm actually having the rear end narrowed slightly to bring them in a little. I had some room on the inside but was rubbing the outside with me in the car. But after seeing it with the 325's on it there was no ****ing way I was putting a smaller tire on it.. Here is the best pic I have of it with non narrowed rear.

This is a 15x8? whats your backspace?

 

[kalinnew]

What size tire is that?

 

[f2hatch]

TBC_4733 by D.C. 83, on Flickr

still my favorite cobra after all these years.

 

[SYMach1]

27s on race springs...

 

[01blackthunder]

So who makes a 16x10 still? Looking for a set to put on my 04

 

[Jmurrz]

So who makes a 16x10 still? Looking for a set to put on my 04

I know that the 16" Bogart D10 is not made anymore, the 16" Weld XP is discontinued, but you might be able to go the custom route with a True Forged setup or a CCW Drag pack. If you wanted a budget wheel Diamond racing makes one too. If you are not afraid to grind some material off the toe link and the banjo bolt, you could use a 15x10 Weld RT-S wheel.

 

[cobra_xiong]

N

Sent from my [device_name] using the svtperformance.com mobile app

 

[SVT_Troy]

Got me to reply to an old thread..... ha free bump

 

[astanek1]

I know my car isn't exactly ground breaking looking with the RT-S setup (they're becoming the Fox body Draglites of Terminators, lol) but here's mine. Recently switched to this from a TF Mach 5 setup.

View attachment 496219

View attachment 496220

Long shot but what size are these and how did you get them to fit.