Kooks long tubes installed

Snakesvt04

SCREW THIS
Established Member
Joined
Apr 10, 2005
Messages
4,138
Location
Bowie,MD
Installed kooks long tubes and bassani exhaust. Nice and clean setup. Sounds really good! Very basic and easy to install.
20151223_224451_zps0sxrjlpn.jpg


20151223_224527_zpsjujiuvke.jpg
 

jdcobra

Well-Known Member
Established Member
Joined
May 13, 2009
Messages
3,114
Location
TX
It's easier if you have tapatalk. That's all I really use to download vids and pics, works pretty good.
 

jdcobra

Well-Known Member
Established Member
Joined
May 13, 2009
Messages
3,114
Location
TX
Jesus that sounds nasty! Any drone with that setup?
 

Ultrakla$$ic

WhoFlungPoo
Established Member
Joined
Aug 16, 2010
Messages
1,870
Location
Louisiana
Did you drop the K-member? I'm assuming so since you were able to put Stage 8 locking bolts in all the holes. I'm struggling just to remove the OEM nut on the factory manifold near the A/C lines. LOL
 

Snakesvt04

SCREW THIS
Established Member
Joined
Apr 10, 2005
Messages
4,138
Location
Bowie,MD
I took off the motor mounts only. The AC line you talking about was tight. I put a screw driver and slightly bent the the line just enough to fit the socket. Worked great. Drivers side was easy. They recommend not to use the the stock studs and nuts due to clearance when bolting back on
 

blackbeast12

Dr. Frankenstang
Established Member
Joined
Apr 30, 2012
Messages
3,929
Location
Delaware
Retorque the header bolts after 300 miles mine came loose because i did'nt retorque after 300 miles!
 

Users who are viewing this thread



Top