• Welcome to SVTPerformance!

IRS Installation Guide inside

Discussion in 'SN-95 and New Edge Mustangs' started by SVT_MAN, Oct 16, 2020.

  1. SVT_MAN

    SVT_MAN New Member

    Jun 6, 2018
    Hello Fellow New Edgers -

    I recently installed a 2001 Mustang Cobra IRS into my 1999 Mustang GT, and I decided to write up an installation guide based upon what I learned from the process with the goal of helping fellow Mustang owners who want to do the same.

    I hope some of you find this IRS Installation Guide helpful:
    Declaration of Independence: Part V

    The guide focuses on New Edge cars - but perhaps it could be useful to SN-95 as well with some small modifications.

    I also wrote some other blog entries leading up to the install. They document what I did to refurbish the IRS prior to the install. (The unit was sitting on a barn floor for a long time before I came to possess it.)

    I did some rust removal and installed new bushings since the existing MM bushings were completely shot and destroyed. I replaced with Full Tilt Boogie Racing's kit.

    Here are those entries:
    The Declaration of Independence
    Declaration of Independence: Part II
    Declaration of Independence: Part III
    Declaration of Independence: Part IV

    I'm not a master mechanic - and don't pretend to be - but at the same time, these serve as proof that even shadetree mechanics like me can do this install with a little perseverance and help from some friends.

    I hope you find these entertaining and/or helpful!


Share This Page