Install on scavenge pump.

EvilTwins

I can't find my pulley!
Established Member
Joined
Aug 13, 2007
Messages
1,133
Location
St. John's, NFLD Canada
You're 100% sure that they are still burning oil? You had A LOT of oil in your exhaust piping, if you didnt clean it out it will take some time to burn off!
 

sonicsaleen

1st or last
Established Member
Joined
Jun 26, 2007
Messages
4,362
Location
Davenport,IA
ya. The turbos are leaking bad, i can watch oil drip out of them. So i have no clue whats going on. The pump is running the right way , no kinks in the line.
 

9397SVTs

Well-Known Member
Established Member
Premium Member
Joined
Oct 28, 2012
Messages
1,733
Location
AZ
I have the old HP twin kit on my car. I'm using a TurboWerx scavenge pump. It's mounted, upright, to the front of the passenger side shock tower. The turbo's are fed via -3 lines and have restrictors. Each has an equal length -12 drain line into a "T". There is a -6 coming off the "T" to the pump and a -6 from the pump to the front of the oil pan. I have not had any problems with this set up. The "T" needs to be the lowest point in the system.

It originally had -4 feed lines without restrictors and this provided too much oil and pressure. It would smoke.
 

Users who are viewing this thread



Top