Hypercoil Coil-over Helper Springs F/R

2DXTRM

Pushrod 5.0
Established Member
Joined
Sep 17, 2008
Messages
2,422
Location
Some time zone
SOLD


Have a pair of the following Hypercoil coil-over helper springs. With spacers.

This "helper" spring will keep tension on your main spring while the car is lifted for service. These helper springs help keep the primary spring from becoming unseated when not under compression.
These short coils have very low spring rates and are coil bound when the suspension is loaded. They will not affect the rate of your chassis springs. It is approximately 1/4 inches long when compressed.


FRONT:
CS100 - 2.5" I.D - 4.000 in free length. 25 lb/in Spring Rate. Steel Spring. Brand New in Box

EIBSPACER250 - 2.5" I.D spring spacer (between coilover spring and helper spring)
SOLD


REAR:

HELPERSPRG - 2.25" I.D - 4.000 in free length, 25 lb/in Spring Rate
Slight used.

EIBSPACER225 - 2.25" I.D spring spacer (between coilover spring and helper spring)
SOLD

47001981322_d68861faa8_z.jpg


View attachment 1550796

View attachment 1550797

47001982982_40d3cee473_z.jpg
 
Last edited:

Users who are viewing this thread



Top