How-to install a kennybell boosta pump

[ttype69]

don't forget to subscribe to my youtube page

I had to do allot of searching in the how-to section to figure out how to wire a busta pump. The manner that I wired up my boosta pump fit my build the way I needed it to, this may not be the same for others.
Ill start out by posting all the threads and pictures i used. I wanted to say thank you to all the other members that made the threads. I used to put the videos together

ok these are links that you may want to check out for extra info.

http://www.svtperformance.com/forum...how-allowing-oe-type-fuel-pump-actuation.html

http://www.svtperformance.com/forums/how-230/244875-bap-wiring-upgrade-installation-directions.html

http://www.svtperformance.com/forums/engine-tuning-214/924398-kb-bap-question.html

http://www.svtperformance.com/forum...1315-trying-go-return-system-please-help.html

http://www.svtperformance.com/forums/engine-tuning-214/818156-triple-pump-question.html

http://www.svtperformance.com/forums/engine-tuning-214/787435-fuel-pump-wiring-return-style.html

and here are my videos

[side note if you are planning on using a boosta pump with a stock style blower at first do not delete the voltage regulator/dial.]

[youtube_browser]NcBV7x-tzmo[/youtube_browser]

[youtube_browser]YY0J14ahS4U[/youtube_browser]

[youtube_browser]6vuEJZCKnNw[/youtube_browser]

Here is a few diagrams. I did not make these diagrams so I cant take credit for them. I put them here for people who needed them can find them.

this is the wiring diagram I used to wire my relay.



Uploaded with ImageShack.us

I did not use this diagram but others may need it.


Uploaded with ImageShack.us

my install pic please wire and loom as you see fit.


Uploaded with ImageShack.us