1. These are the three tools that you will need to install your decklid cover. 1 - marker, 1 - spoon tool, and 1 - drill with 1/4" bit
2. This is what your decklid will look like when you begin.
3. Use the spoon tool and take the wiring harness out of the way. This will make the cover sit against the decklid better to mark the holes.
4. Place the decklid cover against the the decklid and mark the holes.
5. Take your cover down and drill the eight holes with a 1/4" drill bit. Don't put too much pressure against the bottom of the decklid while drilling as you will damage the top of the decklid when you go through.
6. Vacuum the fiberglass shavings up.
7. Reinstall the wiring harness.
8. Install the decklid cover with the supplied push pins.
2. This is what your decklid will look like when you begin.
3. Use the spoon tool and take the wiring harness out of the way. This will make the cover sit against the decklid better to mark the holes.
4. Place the decklid cover against the the decklid and mark the holes.
5. Take your cover down and drill the eight holes with a 1/4" drill bit. Don't put too much pressure against the bottom of the decklid while drilling as you will damage the top of the decklid when you go through.
6. Vacuum the fiberglass shavings up.
7. Reinstall the wiring harness.
8. Install the decklid cover with the supplied push pins.
Last edited:
