How many 93 Cobra Terminators out there??

[tunedin302]

No interference with the FRPP girdle and PH Bar? I have seen in a few other posts issues with it not quite clearing ... any insight on that or did you have to mod it a little bit?

No clearance issues at all with the PHB and girdle. It seems like I would have to take the swaybar and PHB off if I wanted to easily access the girdle but that's about it. The biggest problem I ever had was with the PHB and running tailpipes. That took me about one year before I found a competent exhaust artist that could route the pipes so it would clear everything and still provide room for 285s. Also - it's a low profile girdle but my other one was a standard (older) and it never had clearance issues with the PHB.

 

[IRISH 939]

Almost finshed ....

 

[WillyB93]

Almost finshed ....

Looking good, still working out some of the bugs?

 

[IRISH 939]

Looking good, still working out some of the bugs?

bugs are worked out pretty much, just a few odds and ends, and needs a tune

 

[blownfox]

Hey tunedin302, i have a question about your phb.

What type of wheels are on your car? I heard you cant run the phb when backspacing of the wheel is greater than 5.85. Unless you use spacers to push the wheel out.

 

[racerbox77]

Almost finshed ....

I've heard you no longer need to replace the whole cars wiring. Someone makes a kit for the engine harness to plug into the Foxbody harness. Anyone have any information on that?

 

[tunedin302]

Hey tunedin302, i have a question about your phb.

What type of wheels are on your car? I heard you cant run the phb when backspacing of the wheel is greater than 5.85. Unless you use spacers to push the wheel out.

I currently run BBS 10" on the rear. Before that I had the Saleen 10" wheels. I've never heard of a backspacing issue when using the PHB. Any examples of what you're talking about? You might be talking about interference when using the TA. The TA allows more articulation in the rear and can cause (in rare instances) the inner tire to rub the inner fender if the backspacing is not correct (or unless using spacers). I run a 285 tire, 10" wheel and 1/8" spacer and it does NOT rub on anything. Hope this helps. Let me know of any questions.

 

[blownfox]

Thanks tunedin302. When I was ordering my coilover kit from MM I asked about the phb. They asked about my wheels (18 x 10 saleens) and said I would need spacers so there would be no rubbing. Every foxbody is different but will probably add the phb down the road.

I currently run BBS 10" on the rear. Before that I had the Saleen 10" wheels. I've never heard of a backspacing issue
when using the PHB. Any examples of what you're talking about? You might be talking about interference when using the TA. The TA allows more articulation in the rear and can cause (in rare instances) the inner tire to rub the inner fender if the backspacing is not correct (or unless using spacers). I run a 285 tire, 10" wheel and 1/8" spacer and it does rub on anything. Hope this helps. Let me know of any questions.

 

[tunedin302]

Thanks tunedin302. When I was ordering my coilover kit from MM I asked about the phb. They asked about my wheels (18 x 10 saleens) and said I would need spacers so there would be no rubbing. Every foxbody is different but will probably add the phb down the road.

The PHB is one of the best mods that I've ever done to my car. Good luck and let me know if you have any questions.

 

[BOSS 32V]

Almost finshed ....

Looks awesome! Post up more pics when it's finished please!:rockon:

 

[BOSS 32V]

I like the way this thread is going with all the amazing cars posted, I have to share some of the recent mods done to mine.

18x9 18x10 True Forged mach 5's and 14" Brembo brakes

15x10 TF rear wheels with 275/50/15 Mt's for the track

And practically brand new 04 cobra charcoal seats with matching fox rear seats

 

[IRISH 939]

Looks awesome! Post up more pics when it's finished please!:rockon:

thanks man ! yeah its been a long process, will post some pics soon

 

[IRISH 939]

I've heard you no longer need to replace the whole cars wiring. Someone makes a kit for the engine harness to plug into the Foxbody harness. Anyone have any information on that?

you can use the stock 03 harness, I have one, but went with a Ron Francis kit , makes things a lot simpler by eliminating what you don't need, and mount the computer where you want to , but as far as I know no one makes a direct plug and play kit for a fox /termi

 

[tunedin302]

you can use the stock 03 harness, I have one, but went with a Ron Francis kit , makes things a lot simpler by eliminating what you don't need, and mount the computer where you want to , but as far as I know no one makes a direct plug and play kit for a fox /termi

Correct. Ron Francis here as well.

 

[racerbox77]

I like the way this thread is going with all the amazing cars posted, I have to share some of the recent mods done to mine.

18x9 18x10 True Forged mach 5's and 14" Brembo brakes

15x10 TF rear wheels with 275/50/15 Mt's for the track

And practically brand new 04 cobra charcoal seats with matching fox rear seats

Do the 03 Cobra seats make you sit up kinda high in the car?