FOR SALE: Hooker headers 6225-1HKR

Hulk

Member
Established Member
Joined
Oct 18, 2005
Messages
94
Location
SW Michigan
Admins, this is my first for sale post. I read the rules and have tried to cover the bases. If something is missing, please let me know and I will fix it.

$600 obo + shipping, or possible trade. Put up what you have, worst I can do is pass. PayPal only, it protects both of us. If we meet locally, cash would be ok.
located in SW Michigan (49022)

Cliff notes: NEW, never been mounted. 79-93 Fox Body with 302 and TFS race heads. OR, any head with provided adapter plates. The race head exhaust ports are raised 1/2". High Ports are raised 3/4" so depending on your setup these may work with those as well. On non-raised exhaust ports, they will hang almost 1/2" lower than regular long tubes. Check your clearances. These headers are discontinued by Hooker. I bought them from someone who claimed they were 351W swap headers. I cannot use these, maybe you can. There are two small dings, as seen in the photos.

Description: 79-93 Mustang, 79-86 Capri: 302W(TFS), Tube 1.75" x 30" Collector Size 3", Collector Length 8", Header for TFS-Twisted Wedge Race Head, Ceramic Coated. N pattern exhaust, but 5/16" plate adapters for regular exhaust bolt pattern included.

Click here for Hooker web page with all the specs. Click here for the PDF sheet with installation and compatibility info. The photos there show the headers before assembly. I have mocked them up assembled, but they have not been welded or anything so you can take them back apart. I assume this is for ease of installation, and will likely take them back apart for shipping.

Preferred contact is text. Please text me at A0E64855 (this is a hexadecimal number. Google hex to decimal converter and convert this number to decimal to get my phone #). Can also look me up on FB messenger at ryan.hardy.92

PXL_20210507_234149266.jpg PXL_20210507_233807405~2.jpg PXL_20210507_233802158~2.jpg PXL_20210507_234212244.jpg PXL_20210507_234216635.jpg PXL_20210507_233643622~2.jpg PXL_20210507_234616884.jpg PXL_20210507_234149266.jpg PXL_20210507_233807405~2.jpg PXL_20210507_233802158~2.jpg PXL_20210507_234212244.jpg PXL_20210507_234216635.jpg PXL_20210507_233643622~2.jpg PXL_20210507_234616884.jpg
 

Hulk

Member
Established Member
Joined
Oct 18, 2005
Messages
94
Location
SW Michigan
still have them?
yes i do. i built cardboard shipping boxes for them with spacers on the inside to keep them from being crushed. and the headers are wrapped in a lot of bubble wrap. i plan on making a short video showing this packaging, so people can have confidence the headers won't get damaged by accident.
 

Users who are viewing this thread



Top