Holley 7” dash gps issue

[03 Cobra DSG]

Just finished up my turbo swap, Holley HP, 6r80 swap, 80mm turbo. Cars is running and driving and goes back to the shop for dyno tuning on the 14th. Have an issue with the Holley dash speedo not working I’m thinking it’s software/firmware issue and seeing if anyone else has had this issue.
Thanks,


Sent from my iPhone using the svtperformance.com mobile app

 

[CobraSam]

Where did you place the gps sensor?
Does it read zero MPH or no reading at all?

 

[CobraSam]

Go onto the Holley forums and create an account. Post the question over there and I’m sure Danny Cabral or AndrewB will help you out.
FYI, I’d you need a remote tune help at all, AndrewB is beyond top notch.

 

[03 Cobra DSG]

Where did you place the gps sensor?
Does it read zero MPH or no reading at all?

It’s under the wiper cowl where the openings/slits are (I did move it to the roof to see if that was the issue but it wasn’t) it’s goes between acquiring and no gps. Never goes to zero.


Sent from my iPhone using the svtperformance.com mobile app

 

[CobraSam]

Ya that should work just fine. That’s where mine is, and it works there. Im thinking the gps sensor itself is bad. Where it says acquiring or no gps. Mine will sometimes do the same thing, although very rarely. It works 98% of the time.
Shit, I had to send my terminator X ECU back to Holley because it was bad right out if the box. Sucks, but as I’m sure you know, nothing electronic is 100%.