help with aeroforce wideband a/f kit

[emwieczorek]

I don't post much on here; I tend to find everything I need via searching the forums or using google. I am stuck on an issue with my aeroforce wideband kit.

I have an 08 and an o/r h pipe. I put the bosh wideband oxygen sensor on the top passenger side.

I in the process of wiring everything up. The instructions state to connect the rid wire to a switched 12 volt source; that is complete. I have it grounded. I am not using the orange wire. Do I have to find another switched 12 volt source for this white wire??

Thank you.

Eric
Lincoln, NE

 

[Nsssane1]

If you have a 12v and a ground you have to make a connection to the gauge. Two plugs run from the gauge one to obd port one to connect analogs such as widebands.

 

[forcefedjunkie]

The red and white wires can be tied together and connected to the same switched 12v source.

Todd