Help what wire for tps signal on 11 gt500

rw95gt

Yes, it's stock.
Established Member
Joined
Mar 25, 2007
Messages
1,243
Location
NC
I need to know what wire to use on the pcm to get a accelerator pedal signal.

Is the pcm on the 2011 gt500 differant form the 2010 gt500? I thought i needed to use pin numbers 17 on the middle wirring harness to the pcm. blue with white stripe but there is no blue with white strip wire on the middle harness to the pcm and no wire in positon 17.

Any help would be greatly appreciated.
 

rw95gt

Yes, it's stock.
Established Member
Joined
Mar 25, 2007
Messages
1,243
Location
NC
I just used the blue with white stripe wire on the gas pedal. It worked fine for my car. Know I need a good tach signal. I guess im going to use a wire from a coil to get a good tach signal.
 

Users who are viewing this thread



Top