HELP.. Torque specs on Rear Diff Housing..

[AngelOreo]

I Can't seem to find the right thing and I can't torque it down

 

[TRBO VNM]

what are you looking for? front bushings? rear bushings? cover bolts? ABS sensor bolts? there is a lot back there.

 

[TDoh]

...and Jason read from his Bible, and he said "Lo, ye shall torque your rear differential housing bolts to 65 ft/lbs of torque, and ye shall tighten in a crisscross pattern", and the bolts were properly secured, and it was good.

 

[TRBO VNM]

...and Jason read from his Bible, and he said "Lo, ye shall torque your rear differential housing bolts to 65 ft/lbs of torque, and ye shall tighten in a crisscross pattern", and the bolts were properly secured, and it was good.

hahaha, ummm the cover specs are not that high.

here are some, compliments of POSTBAN. go figure, the cover specs are not here. anyone with a IRS brace, the specs are in the instructions. I believe they are 25 lb-ft. no special sequence that I remember.

IRS TORQUE SPECS
Subframe-to-body bolts 76 lb-ft
Subframe-to-rear bracket bolts 76 lb-ft
Subframe rear bracket-to-body bolts 59 lb-ft
Shock absorber-to-lower arm and bushing bolts 98 lb-ft
Shock absorber-to-body nuts 30 lb-ft
Upper arm and bushing-to-subframe nuts 66 lb-ft
Upper arm bushing-to-knuckle nut 66 lb-ft
Lower arm and bushing-to-subframe bolts 184 lb-ft
Lower arm and bushing-to-knuckle nut 85 lb-ft
Toe link-to-subframe nut 35 lb-ft
Toe link-to-knuckle nut 35 lb-ft
Stabilizer bar bracket bolt 41 lb-ft
Stabilizer bar link nuts 35 lb-ft
Rear axle diff rear insulator-to-axle housing bolts 76 lb-ft
Rear brake disc dust sheild-to-knuckle bolts 89 lb-in
Brake line-to-rear brake caliper bolt 30 lb-ft
Parking brake cable bracket-to-lower arm bushing bolt 11 lb-ft
ABS sensor bolt 17 lb-ft
Axle shaft-to-hub retainer 240 lb-ft
Driveshaft to pinion flange 83 lb-ft
Wheel nuts 95 lb-ft

FRONT END TORQUE SPECS
Front shock absorber upper nut - 74 ft/lbs
Front shock absorber-to-spindle nuts - 148 ft/lbs
Shock absorber upper mount-to-body nuts - 30 ft/lbs
Shock absorber upper mount-to-body bolt - 30 ft/lbs
Wheel hub and bearing retainer nut - 258 ft/lbs
Stabilizer bar bracket nuts - 52 ft/lbs
Stabilizer bar link nuts - 14 ft/lbs
Anti-lock brake sensor bolt - 53 in/lbs
Anti-lock brake sensor wire bracket nut - 21 ft/lbs
Ball joint-to-front wheel spindle nut - 129 ft/lbs
Front suspension lower arm-to-body nuts - 148 ft/lbs
Tie-rod-to-spindle nuts - 41 ft/lbs
Steering gear-to-crossmember nuts - 52 ft/lbs
Wheel nuts - 95 ft/lbs