help! oil separator install

[ib_604]

ok, well i have looked high and low, for more clear instructions on how to install this oil separator i bought for Mark @ LFP.

i got my buddy to through it in for me, but i am fairly certain, that he connected it to the wrong hose that comes off the intake.

i know this is supposed to be easy, but i am not 100% on this.

i did use the search, but turned up nothing, as well as looking on the net.

I did find these instructions from CJ Pony Parts, but they are for an earlier model cobra.

can anyone confirm that the install would be the same on the 03/04 cobra?

THANK YOU!

 

[ib_604]

PS - the link for the instructions @ CJ Pony

http://www.cjponyparts.com/TechOilSep.asp

 

[SnakeBit]

I goes on the tube coming off of the driver's side valve cover. Flow direction is from valve cover to the intake.

 

[MalcolmV8]

Wow I just looked at that oil/air separator on LFP web site. That's just a standard mini air compressor water/air separator with the bottom drain valve blocked. I bought one from a local harbor freight (www.harborfreight.com) store for $5.99 and installed it on my truck for the same purpose. Works great. Nice mark up.

 

[utfan98]

You can make one for $21.00 search and seek. Very easy 10 minute install which helps a lot.

Seperator is available in black at Home Depot, looks better than blue IMO.

 

[MalcolmV8]

The harbor freight one I got was black too.

 

[ib_604]

thanks!

I goes on the tube coming off of the driver's side valve cover. Flow direction is from valve cover to the intake.