Help me locate the FRPS
- Thread starter mdever12
- Start date
EDIT_ This----/\
Picture #1
Directly attached to the driver side fuel rail, at the very front end.
The squarish looking sensor with an electrical connection and a vacuum line.
Buy two, keep the spare in the console with the appropriate tool to change it.
Picture #1
Directly attached to the driver side fuel rail, at the very front end.
The squarish looking sensor with an electrical connection and a vacuum line.
Buy two, keep the spare in the console with the appropriate tool to change it.
appreciate it man :beer:
Sounds good! And is that KB disc worth it?
i just installed the KB disc on my car, only because i popped 2 sensor's so far.. 1 at the track, and 1 when i laid into it on the street in 2nd gear, then let out of it.. so far so good on the disc.. i havent been too rough with it yet.. but i did do another street pull like before, and it didnt blow like last time.
Mine blew getting on it in 2nd gear too. I think I'll go ahead and get the KB disc, seems like cheap insurance. Thanks for the info man!
popped two frps...installed disc works like a champ highly recomend it!
Just ordered mine man, thanks for the recommendation!
And guys, is this the right part number for the FRPS?-- "STANDARD MOTOR PRODUCTS Part # FPS7"
Basically the same photo from my Terminator FAQs with the FRPS circled. Just shows a slightly larger image of the FRPS.
I also have a KB disc. Never blew one yet, but I do keep a spare on hand. Hope to never need it. KB disc will soften the pressure spikes that would blow the FRP. It should definately prevent the problem
Be sure and change your oil if you popped the FRPS, because it's contaminated with gas now.
I have a KB disc and would recommend it, like you said it's cheap insurance.
I have a KB disc and would recommend it, like you said it's cheap insurance.
Users who are viewing this thread
