Header Install ??

[Homer Jay]

Hey guys...

I bought a set of used ARH 1 7/8" headers and an off-road H pipe from a forum member. I ordered new factory Ford exhaust manifold gaskets.

For those that have installed the headers, I have two clamps. Is there anything else that I need to get for the install? Bolt kit? I see a decent amount of installs were using the factory studs/nuts...that was my plan as well...

Does only two clamps sound right?

I just don't want to be missing something when I drop the car off with the installer. Thanks!!


Sent from my iPhone using Tapatalk

 

[kcobra]

If you can get bolts, small ones, which will give you more room to work, that would be good. You probably could have re-used the gaskets, but can't hurt to get new ones. Easiest way would be just drop the K member.

 

[Bobbyblaze]

Keep the factory studs, don't use the bolts is what I was told. I also bought new oem nuts for my install, don't know if that was necessary or not but I just wanted to be safe then sorry and have a leak.

 

[Homer Jay]

Keep the factory studs, don't use the bolts is what I was told. I also bought new oem nuts for my install, don't know if that was necessary or not but I just wanted to be safe then sorry and have a leak.

Thanks!