guage install help.....

[the50ho]

I am putting in an Autometer water temp, air/fuel, and nitrous guage in my 98 cobra.

I need any tips, or pointers some of you may have used in the intsall on some of your cars.

I need to know also which pin, and where to connect the air fule guage into the computer......where should I place the sending unit for the temp guage....and overall, any tips or pointers I may not know about with the nitrous guage.

Thanks!

 

[SVTHorsnake]

get the ecu pin-out diagram from the dealer so you don't run a wire to the 0-2 sensor on the outside and run it to the lead that is marked for either of the precat sensors (I would tell you which pin it is because I did the a/f gauge although I own an '01) for the rest, well............:shrug:

Good Luck!