FOR SALE: Good 4v build parts

phil a

Active Member
Established Member
Joined
Aug 8, 2006
Messages
241
Location
Toledo, OH
OK, clearing out the garage of the parts I'd amassed to build this Teksid 4V. Just sold the Gen5 Whipple in the other thread and people had mentioned they might be interested in other stuff. I'd prefer to sell this stuff locally, especially the bigger/heavier things but will ship. Figure PayPal is the easiest and safest means for both buyer and seller. There are tons of little odds and ends that I'm going to list - it would be so much easier to ship lots of things together rather than making daily runs to the post office between long hours at a busy job and family, with the third kid due up in the next few weeks.

Here we go....

Kellogg crank - will need to have the rod journals turned 0.010" under. Threads in the snout are very good. Some surface rust on the counterweights that will come off during the cleaning/machining process.
$400

King CR 868si rod bearings
$30

Ford stamped reluctor wheel
$20

ARP 254-2801 flywheel bolts
$30

Innovators West balancer #813
$450



ID1300cc injectors. Freshly cleaned/flowed with no run time since.
$1000 - SOLD

3V HV/HP oil pump
New in box
Steel back plate
DR3Z-6600-A
$90 - SOLD

ARP head studs 256-4201
Torqued once in cylinder honing process
$375 - SOLD

Teksid block. ~70k miles, pulled from a MkVIII. Bearings all looked perfect. I had it bored 3.554 where it cleaned up to keep as much cylinder wall there as possible. This was done with a torque plate and head studs. I had planned to call and get pistons custom made to fit this bore. The mains were torqued, including the side bolts, and it did not need to be align honed. The entire block has been deburred. All holes (head bolts, main bolts, etc) have been chased (noncutting tap) and cleaned. The front dowel pins have been tapped for the larger steel pins from Cobra Engineering. I have the rear seal. I'm happy to sell the block with the ARP main studs (156-5901)/side bolts (156-5001) as it sits (both sets are brand new).
$900 w/ hardware. Will include M-6026-A46 block kit and new brass freeze plugs.
SOLD

DB cylinder heads
Cam caps/bolts all present. Still assembled with stock valves/springs. I have the lifters and followers as well. Camshaft bearings look very, very good. I can take more detailed photos if I have an interested buyer.
$500 - SOLD

Kellogg crank - looks good/measures out and can be run std/std. Threads in the snout are very good.
$600 - SOLD

03 Cobra cams / sprockets
$50 or free if you buy something else and pick it up lol - GONE

Boundary billet OPG for 3V pump
$175 - SOLD

Felpro head gaskets - 26187 and 26222
$75 - SOLD

Melling JB-2271 lifters (32)
$125 - SOLD

Cloyes S869HP crankshaft sprocket
$60 - SOLD

Accufab billet reluctor wheel
$125 - SOLD

3V windage tray (used) - some surface rust that'll clean off easily
$60 - SOLD

Accufab secondary timing chains
$200 - SOLD

Cobra Engineering billet tensioner
$150 - SOLD

Cobra Engineering drill template with steel pins
$180 - SOLD

Shelby Mike billet timing arms and wear strips - for larger steel pivot pins
$250 - SOLD

Comp 10254 adjustable timing gears (used - 10 miles)
$230 - SOLD

Cloyes stationary timing guides - 95464 and 95461
$30 - SOLD

Gigantic box of Ford parts - oil pump, gaskets, seals, primary tensioners, one secondary tensioner
I'm going to just upload a picture of the part numbers ,along with the actual photo of the parts themselves, to cross-reference
I would prefer to sell this all together; it's all going to be needed if you're building a 4V
$500 - SOLD

ARP AZW200, 300-8305, AQ4.750-1LB
Stud, washer, and nut to use to convert crank to stud-mounted balancer
I had to order these direct from ARP
Will include w crank purchase
$40 - SOLD

Stainless exhaust manifold studs + nuts
$30 - SOLD

4.6 flywheel holding tool
$25 - SOLD



Thanks - Phil
 
Last edited:

phil a

Active Member
Established Member
Joined
Aug 8, 2006
Messages
241
Location
Toledo, OH
Photos
 

Attachments

  • 492FFE5B-4AEE-46DD-B7C4-1A36A2AC293B.jpeg
    492FFE5B-4AEE-46DD-B7C4-1A36A2AC293B.jpeg
    98.5 KB · Views: 168
  • 9989B3D2-433A-40EA-8240-61B34A7EC0FE.jpeg
    9989B3D2-433A-40EA-8240-61B34A7EC0FE.jpeg
    100.9 KB · Views: 162
  • 94AEDD35-4056-4DDB-98A7-C5258D340699.jpeg
    94AEDD35-4056-4DDB-98A7-C5258D340699.jpeg
    102.8 KB · Views: 174
  • A238376B-B9B4-4EB8-86B7-5C7B74AA11CE.jpeg
    A238376B-B9B4-4EB8-86B7-5C7B74AA11CE.jpeg
    111.5 KB · Views: 180
  • D4005D4B-74AC-4D74-8F13-AF8A48DAEB8A.jpeg
    D4005D4B-74AC-4D74-8F13-AF8A48DAEB8A.jpeg
    97.8 KB · Views: 177
  • FB14924D-9CDD-4A5B-8F53-245E8AA358DC.jpeg
    FB14924D-9CDD-4A5B-8F53-245E8AA358DC.jpeg
    103.7 KB · Views: 168
  • C42E616E-619D-4585-A887-5A20818E218C.jpeg
    C42E616E-619D-4585-A887-5A20818E218C.jpeg
    108.9 KB · Views: 145
  • 010AE141-DCC7-4BEE-AE29-549C76DF2C6F.jpeg
    010AE141-DCC7-4BEE-AE29-549C76DF2C6F.jpeg
    64.4 KB · Views: 145
  • F3EF8AEB-2722-4931-888E-7F3AF9409AA0.jpeg
    F3EF8AEB-2722-4931-888E-7F3AF9409AA0.jpeg
    106 KB · Views: 144
  • 19989E65-8FD1-43E9-8815-C2C6D5AF9F21.jpeg
    19989E65-8FD1-43E9-8815-C2C6D5AF9F21.jpeg
    112.8 KB · Views: 155

phil a

Active Member
Established Member
Joined
Aug 8, 2006
Messages
241
Location
Toledo, OH
More photos
 

Attachments

  • 75251513-5D00-41AE-B1CD-34FE21D22DA9.jpeg
    75251513-5D00-41AE-B1CD-34FE21D22DA9.jpeg
    107.2 KB · Views: 127
  • EA475D17-8636-41AA-8115-86D30CA6E19A.jpeg
    EA475D17-8636-41AA-8115-86D30CA6E19A.jpeg
    81.8 KB · Views: 117
  • 1A9714B4-7796-4CDB-A043-D7CDE950AE24.jpeg
    1A9714B4-7796-4CDB-A043-D7CDE950AE24.jpeg
    101 KB · Views: 120
  • 6CEADE30-CA4D-434F-8BAA-92FC3FB320DB.jpeg
    6CEADE30-CA4D-434F-8BAA-92FC3FB320DB.jpeg
    114.2 KB · Views: 108
  • 1A3A8302-77E5-48FA-BB43-27B4FA0F9AA4.jpeg
    1A3A8302-77E5-48FA-BB43-27B4FA0F9AA4.jpeg
    148.7 KB · Views: 124
  • 8E59156B-13B0-41A4-A01F-58CA83FA04C0.jpeg
    8E59156B-13B0-41A4-A01F-58CA83FA04C0.jpeg
    70.6 KB · Views: 129
  • 69B1E2BB-CCDB-4328-88ED-6A82B888622F.jpeg
    69B1E2BB-CCDB-4328-88ED-6A82B888622F.jpeg
    98.4 KB · Views: 119
  • EB8F3E7E-76C4-4657-87C0-975CEFBE04BB.jpeg
    EB8F3E7E-76C4-4657-87C0-975CEFBE04BB.jpeg
    76.8 KB · Views: 117
  • 422A0AB5-7BF8-4023-ABD5-069E7320C4BC.jpeg
    422A0AB5-7BF8-4023-ABD5-069E7320C4BC.jpeg
    110.8 KB · Views: 118
  • 0C826F64-CBDC-4EAD-8216-53427A0AABD4.jpeg
    0C826F64-CBDC-4EAD-8216-53427A0AABD4.jpeg
    123.2 KB · Views: 126

phil a

Active Member
Established Member
Joined
Aug 8, 2006
Messages
241
Location
Toledo, OH
More photos
 

Attachments

  • 7D0F2D0C-ADF0-40DB-9973-B1B00796F29D.jpeg
    7D0F2D0C-ADF0-40DB-9973-B1B00796F29D.jpeg
    110.4 KB · Views: 110
  • 3DA399DD-1ECC-4196-91DE-D28A90973BAF.jpeg
    3DA399DD-1ECC-4196-91DE-D28A90973BAF.jpeg
    98.6 KB · Views: 102
  • F0139F01-6F6C-403E-B9B4-4A6183842D26.jpeg
    F0139F01-6F6C-403E-B9B4-4A6183842D26.jpeg
    112.5 KB · Views: 101
  • 9DC40F65-3940-4C16-A3EA-E4ED8F9EE77F.jpeg
    9DC40F65-3940-4C16-A3EA-E4ED8F9EE77F.jpeg
    117.6 KB · Views: 105
  • 6C1E3F6C-B916-4E27-AC64-493F3285FC69.jpeg
    6C1E3F6C-B916-4E27-AC64-493F3285FC69.jpeg
    161.1 KB · Views: 108
  • C26316C4-695E-4572-81F2-396B8B04C017.jpeg
    C26316C4-695E-4572-81F2-396B8B04C017.jpeg
    100.9 KB · Views: 119
  • 409C1605-E391-4EB0-B815-72AB737953EA.jpeg
    409C1605-E391-4EB0-B815-72AB737953EA.jpeg
    98.5 KB · Views: 102
  • FA93E1FE-EABE-4EE9-8856-7FBF0626D4F3.jpeg
    FA93E1FE-EABE-4EE9-8856-7FBF0626D4F3.jpeg
    102.9 KB · Views: 124

phil a

Active Member
Established Member
Joined
Aug 8, 2006
Messages
241
Location
Toledo, OH
Invoice/parts list for the box of gaskets/seals/OP/tensioners
 

Attachments

  • F321E0FE-BF79-453C-9BA5-91530BD44D76.jpeg
    F321E0FE-BF79-453C-9BA5-91530BD44D76.jpeg
    184.5 KB · Views: 100
  • 0A4E268B-EAB7-4ABA-B0B0-85888B1F22D4.jpeg
    0A4E268B-EAB7-4ABA-B0B0-85888B1F22D4.jpeg
    215.2 KB · Views: 98

4sdvenom

Never Enough!
Established Member
Joined
Dec 2, 2003
Messages
2,439
Location
Ft. Wayne, IN
Do you know if there Shelby Mike billet guides are for an 8 mm pivot stud or the 9mm and do you have the new larger pivot studs to go with them?
Very interested in these the standard journal crank and a few other items.
Thanks
Ken
 

phil a

Active Member
Established Member
Joined
Aug 8, 2006
Messages
241
Location
Toledo, OH
Hi Ken
The SM pivot arms are for 9mm pins, which I have.
 

Attachments

  • EA2B57EF-C145-4122-A761-5111EC3A8690.jpeg
    EA2B57EF-C145-4122-A761-5111EC3A8690.jpeg
    273.5 KB · Views: 105
  • C85976CB-DD3E-4921-B69B-4F737F8A9021.jpeg
    C85976CB-DD3E-4921-B69B-4F737F8A9021.jpeg
    250.8 KB · Views: 97

phil a

Active Member
Established Member
Joined
Aug 8, 2006
Messages
241
Location
Toledo, OH
Ahhh, also - I’m in Sacramento CA. We no longer live in Toledo/the Midwest. Had forgotten to update my profile, sorry for any confusion.

All PMs returned as of 1015AM pacific time

Phil
 

srizo1

Active Member
Established Member
Joined
Sep 10, 2013
Messages
157
Location
bakersfield CA
Ahhh, also - I’m in Sacramento CA. We no longer live in Toledo/the Midwest. Had forgotten to update my profile, sorry for any confusion.

All PMs returned as of 1015AM pacific time

Phil
Can you send me more detailed pics of the heads? 661-346-7279
-Sergio
 

phil a

Active Member
Established Member
Joined
Aug 8, 2006
Messages
241
Location
Toledo, OH
04whitelightsvt - messaged you with shipping quote, never heard back - sold to the next guy

dmakx - never heard back about heads after texts/photos; still available

Block available

List updated as of 9/26
 

phil a

Active Member
Established Member
Joined
Aug 8, 2006
Messages
241
Location
Toledo, OH
TTT - still have quite a few parts remaining

Shoot me reasonable offers and we can go from there

Phil
 

Users who are viewing this thread



Top