Hey everyone, time has come to part with the car. So I'm returning to stockish platform. Here's the link to the build if you haven't seen it.
http://www.svtperformance.com/forums/showthread.php?1053716-The-Cobra-Build!&highlight=
Most parts listed are still on the car.
All these parts have 500miles on them or otherwise listed.
$2,500
Wilwood 6piston f/slotted 13" setup
Wilwood 1piston r/slotted 13" setup with external ebrake for (factory design).
Brakes (rear) are for SRA cars only with GT backing plates (not Mach1/Bullitt) and fit 17"+ wheels. All 4 come with SSB lines.
$old!
Metco lower setup with 4# ring.
$old!
Metco tensioner brace.
$old!
Mechman 170a alternator with adapter harness and a case ground strap.
$50 New**
McLeod friction plate replacement for OEM McLeod aluminum flywheels. Either re-rivet or thread your flywheel for screws.
$1,500 plus stock T56 setup
26spline T56
McLeod SFI bellhousing
1-6 billet keys
1-6 bronze pads
3-4 steel forks
Forged retainer
Brass shifter cup
McLeod aluminum flywheel
Lakewood adj fork pivot
Spec 3+ w/pedal option clutch
MGW gen2 shifter
$250 New** only mounted
DivisionX regulator with gauge
DivisionX stock rail feed adapter
DivisionX FRPS adapter
$old!
Maximum Motorsports oil filter relocation HD
http://www.svtperformance.com/forums/showthread.php?1053716-The-Cobra-Build!&highlight=
Most parts listed are still on the car.
All these parts have 500miles on them or otherwise listed.
$2,500
Wilwood 6piston f/slotted 13" setup
Wilwood 1piston r/slotted 13" setup with external ebrake for (factory design).
Brakes (rear) are for SRA cars only with GT backing plates (not Mach1/Bullitt) and fit 17"+ wheels. All 4 come with SSB lines.
$old!
Metco lower setup with 4# ring.
$old!
Metco tensioner brace.
$old!
Mechman 170a alternator with adapter harness and a case ground strap.
$50 New**
McLeod friction plate replacement for OEM McLeod aluminum flywheels. Either re-rivet or thread your flywheel for screws.
$1,500 plus stock T56 setup
26spline T56
McLeod SFI bellhousing
1-6 billet keys
1-6 bronze pads
3-4 steel forks
Forged retainer
Brass shifter cup
McLeod aluminum flywheel
Lakewood adj fork pivot
Spec 3+ w/pedal option clutch
MGW gen2 shifter
$250 New** only mounted
DivisionX regulator with gauge
DivisionX stock rail feed adapter
DivisionX FRPS adapter
$old!
Maximum Motorsports oil filter relocation HD
Last edited: