And finally a finished pic. Like I said above, I still need to install the STB and clean everything up. But this gives a pretty good idea
so im finally done. except for the strut tower brace and the p[plastic piece on the firewall. im making sure everything is good to go before i bolt the brace back in, its a MFer to get on and off.
things i learned and tips for install:
whipple makes a great product but their instructions suck and the could have made some adjustments over the years from all the small things that could be changed
installing the blower, intake and fuel stuff together is a must, im not sure how you would be able to do it piece by piece in the car
the tps harness needs to be extended due to the new location of the tps
you need an iac adapter from cobra engineering if you want to keep your a/c (i do)
You need a slot style maf
You need an adapter harness for you new maf
you need aftermarket fuel rails to clear the plenum
having the j2fab flow mod makes install even more difficult due to its size
the MMSTB-8 brace does fit!!!
the last injector on the pass side is bitch to get clipped into the harness
mark your vac hose very good, again whipples instructions as to what goes where is garbage
thats all i can think of right now. im waiting on 04sleeper to get me a tune then we will start making some noise. i plan to strap it on a dyno once its fully dialed in to see what it makes. my fuel is pump e70
And finally a finished pic. Like I said above, I still need to install the STB and clean everything up. But this gives a pretty good ideaView attachment 1595859
thanks bro. kevin is working on the tune as i type this. hopefully i can make it out to houston for a cars and coffee and catch up with a few other terminator ownersLook'n great! Can't wait for the dyno results
thanks bro. kevin is working on the tune as i type this. hopefully i can make it out to houston for a cars and coffee and catch up with a few other terminator owners
You would think since metco is already in the pulley game it wouldn't take much to make them for aftermarket blowers. I know I'd love a set that all matched. Oh well, first world problems I guessIt’s too bad Whipple doesn’t make idlers to match their blower pulleys or Metco doesn’t make blower pulleys to match their idlers!