Full Length Subframe Special-79-04 Mustangs from $299 Installed

MR. STALLION

Member
Established Member
Joined
Jul 15, 2002
Messages
331
Location
San Jose, CA
Full Length Subframe Special-79-04 Mustangs from $299 Installed

Special introductory price till Oct 31st, 2012


Whether your Mustang only gets driven to the grocery store or driven hard on the road course or drag strip, every 79-2004 Mustang needs subframe connectors! If you take a look at any Mustang which has been driven hard you'll notice most of the body panels no longer line up because of unwanted chassis flex. Having a good set of subframes will help keep your Mustang's body nice and straight while helping to eliminate annoying creaks.

These beefy units are 1.5 x 2 x 66" square tubing which spans the full length of the floor pan providing improved chassis rigidity, handling, and improved ride quality.


large_54_25108_Full_Length_Subframe_Connectors_Powder_Coated_800_dpi__45746_zoom.jpg




Features:
*Taller then most at 1.50" to increase the strength over our competition who typically use 1.00" talltubing
*One of the longest full length on the market at 66" for increased weld area
*Fits 1979 through 2004 Mustangs
*Stops power robbing chassis flex
*Improves responsiveness and control
*Shaped to hug the floor pan of your vehicle for maximum ground clearance
*Doubles as a jacking rail
*Capped ends to seal ends from debris and water


IMG_0018_zps93d312cd.jpg


IMG_0021_zpsa72ea0e6.jpg
 

TPSMak

Authorized Vendor
Authorized Vendor
Joined
Apr 12, 2005
Messages
3,766
Location
san jose, CA/ Norcal
Bump for the best upgrade you can get for your Mustang! This should be the 1st upgrade ANY Mustang 79-04 Mustang owner should have!
 

Users who are viewing this thread



Top