Fuel Fitting Help

[moot09]

I am piecing together my own sumped fuel system. I am planning to run -10AN feed and -8 AN return. Will also be fueled by E85...

I have a few I know that I will need but past that I am a little lost. Goes for the pump/filter fittings as well lol. I'll work on that a little later though.

So far I have in my shoping cart:

Hose:
2 90* -10
2 90* -8
1 45* -10
1 45* -8

Sump: (Are these also considered bulkead fittings? These go directly into the sump I believe)
1 NPT 1/2' to 10an
1 NPT 1/2' to 8an


Thanks!

 

[prostkr]

Does the sump have female pipe threads welded into it? If so you have the right parts. They are npt to an adapters, bulkhead fittings are different.

 

[moot09]

Does the sump have female pipe threads welded into it? If so you have the right parts. They are npt to an adapters, bulkhead fittings are different.

I see.

Yes there are two female pipe threads welded into the sump.

:beer: