• Welcome to SVTPerformance!

FS:posi raceport,longtubes,spray and ect

Discussion in 'Terminator Parts Buy/Sell' started by brett15, Dec 28, 2014.

  1. brett15

    brett15 Member Established Member

    Messages:
    155
    Joined:
    Jan 16, 2013
    Location:
    Lincoln,NE
    Posi Race port upper-1000 shipped!
    stock lower manifold
    Stock intercooler(full eaton swap available! Minus intercooler res.)
    JBA/Kooks longtubes and x pipe-
    Jlt intake and 90mm tube with a ba2800(supports 750whp)-350
    True Forged Intercooler Reservoir-SOLD!!!!
    Wet Nitrous kit-Contact me

    Parts are still on vehicle I will upload pictures as I can feel free to contact me at 402-202-4081 I can send pictures and answer questions that way. Thank you!
    -Brett
     
    Last edited: Jan 1, 2015
  2. brett15

    brett15 Member Established Member

    Messages:
    155
    Joined:
    Jan 16, 2013
    Location:
    Lincoln,NE
    I have more parts that I will sell as I won't need any of the eaton part's. I can make package deals on all the parts as a whole for a complete eaton swap and trade stuff for turbo part's or complete package. Thank you.
     
  3. Cobraguy042768

    Cobraguy042768 New Member Established Member

    Messages:
    21
    Joined:
    Jul 30, 2013
    Will u sell ba2800 separately?
     
  4. joshcarp81

    joshcarp81 Well-Known Member Established Member

    Messages:
    1,051
    Joined:
    Nov 23, 2013
    Location:
    Steubenville Ohio
    If he wants the Ba 2800 I may be interested in the rest of the jlt but need to see pics.
     
  5. Primera_Espada

    Primera_Espada Member Established Member

    Messages:
    92
    Joined:
    Jun 23, 2013
    Location:
    Deland FL
    Do you have pictures of the TF intercooler reservoir? You can text them to me at 386-624-2400
     
  6. 1Kona_Venom

    1Kona_Venom A&P Mechanic Established Member

    Messages:
    2,826
    Joined:
    Feb 19, 2010
    Location:
    Savannah-ish, Ga
    Pics of TF tank and whats the size on the headers and X pipe
     
  7. brett15

    brett15 Member Established Member

    Messages:
    155
    Joined:
    Jan 16, 2013
    Location:
    Lincoln,NE
    I would prefer to keep the jlt and maf together however. If you both have payment I will split them up.

    Messaged and texted about the tf reservoir! Please pm me about the jlt and maf! Thank you!
    -Brett
     
  8. BLACKSN8KE1988

    BLACKSN8KE1988 New Member Established Member

    Messages:
    826
    Joined:
    Oct 14, 2012
    Location:
    Oceanside
    8183910436 pics of intercooler
     
  9. Bdubbs

    Bdubbs u even lift bro? Established Member

    Messages:
    13,182
    Joined:
    Jan 8, 2010
    Location:
    MN
    Pictures help sell faster!
     
  10. brett15

    brett15 Member Established Member

    Messages:
    155
    Joined:
    Jan 16, 2013
    Location:
    Lincoln,NE
    I have been sending pictures to everyone. I am going to try and upload them tonight. A lot of interest in parts. My number is in the add so all of you requesting pictures can send me a text for faster response! Otherwise if you left your number or a pm I believe I have tried to make contact with you to further discuss and send pictures! Happy holidays! Thanks for the understanding of no pictures on the board. I believe I have a few transaction via svtperformance with good feedback and on corral.net! -Brett
     
  11. Primera_Espada

    Primera_Espada Member Established Member

    Messages:
    92
    Joined:
    Jun 23, 2013
    Location:
    Deland FL
    Brett's been very good at responding, he responded to my text as soon as he could :)
     
  12. brett15

    brett15 Member Established Member

    Messages:
    155
    Joined:
    Jan 16, 2013
    Location:
    Lincoln,NE
    I started removing some of these parts today. I should have the blower and manifold off tomorrow. Intake,throttle body,and plenum off! The port #011.

    The maf is a 90mm tube ba2800 just to let me people know. The headers are jba(kooks) longtubes I will need to verify the size before I post it. I plan on checking on that tomorrow when I work on the car a little bit more.

    Everyone I believe I have responded too. A lot of interest in everything :) Pictures sent and texts replied. If I missed you PLEASE don't hesitate to contact me again! :) Thanks everyone!
    -Brett
     
  13. brett15

    brett15 Member Established Member

    Messages:
    155
    Joined:
    Jan 16, 2013
    Location:
    Lincoln,NE
    TF Res... Is pending payment!
     
  14. 1Kona_Venom

    1Kona_Venom A&P Mechanic Established Member

    Messages:
    2,826
    Joined:
    Feb 19, 2010
    Location:
    Savannah-ish, Ga
    Hey Brett....are these the same headers from a previous F/S thread back in November-----that you had posted? Just curious......

    http://www.svtperformance.com/forum...ort-long-tubes-nitrous-xpipe-dumps&highlight= (SEE POST#12)
     
  15. brett15

    brett15 Member Established Member

    Messages:
    155
    Joined:
    Jan 16, 2013
    Location:
    Lincoln,NE

    I will need to double check but yes. I believe they are. Good find. I have been off the board for some time.(Ill get to your text/pm once I verify!)

    The upper and lower is pulled off off the vehicle! I must had misunderstood the previous owner or he maid a mistake the manifold is not in fact ported. ONLY the upper!!!! I will make sure everyone understands this before it is sold by itself or as a pair!

    Payment received for the intercooler res. Will be sent out at the end of the week! :)
     
  16. brett15

    brett15 Member Established Member

    Messages:
    155
    Joined:
    Jan 16, 2013
    Location:
    Lincoln,NE
    1000 Shipped for the posi race port!
     
  17. brett15

    brett15 Member Established Member

    Messages:
    155
    Joined:
    Jan 16, 2013
    Location:
    Lincoln,NE
    IMG_0072.jpg
    IMG_0083.jpg
    IMG_0087.jpg
    IMG_0091.jpg
    IMG_0092.jpg
     
  18. brett15

    brett15 Member Established Member

    Messages:
    155
    Joined:
    Jan 16, 2013
    Location:
    Lincoln,NE
    IMG_4840.jpg
     
  19. brett15

    brett15 Member Established Member

    Messages:
    155
    Joined:
    Jan 16, 2013
    Location:
    Lincoln,NE
    Please do not mind the engine bay! Previous owner didn't know how to make things look decent...! 1000 shipped to your door for the posi paypal fees I will pay for. Thank you!
     
  20. brett15

    brett15 Member Established Member

    Messages:
    155
    Joined:
    Jan 16, 2013
    Location:
    Lincoln,NE
    Pending deal on eaton swap.... thanks svt!
     

Share This Page