looking to sell outright or possibly trade up for a terminator or modded c5.
going to start at $16,000 and go from there.
basics: the car has 38,xxx miles on it and is on its second owner. all mods have been performed by the current owner.
engine:
-stock rotating assemly
-p1sc procharger tuned to 6.75lbs.
-ported intake
-42lb. injectors
-big single blade throttle body
-stage 1 frpp heads
-stage 2 comp cams with supporting springs and retainers
exhaust:
-bassani mid-lengths
-bassani O/R x-pipe
-bassani catback
...sounds amazing...:rockon:
suspension:
-h&r springs
-strange 10-way struts
-50/50 lakewood shocks
-adjustalble rear lower control arms
-4-bolt c/c plates
rearend:
-full spool
-4.10s
-33-spline axles
-big wheel studs
-girdled
misc:
-dual focus pumps
-17in. cobra style wheels...17x9 and 17x10.5
-steeda based shifter with pro 5.0 handle
-stock clutch
-autometer a/f and boost guages mounted on the a-pillar
the car was tuned in 2009 by kurgan when they were still in chicago. the initial dyno pull yeilded 531whp and was detuned for obvious reasons. the current tune put down 494whp and 430wtq and has ran flawlessly that way since. it has been down the track a few times too. the quickest its been is 11.8 at 125. its a great streetcar that has made several roadtrips with no problems. the a/c still blows cold. the only thing that has gone bad was the radiator fans last summer, aside from that it is kind of a freak of nature. the body is in pretty good shape. there is a dent above the passenger rear wheelwell that is not very noticeable with the car being white. i dont have too many pics but there are a few and a flyby video of the car below. feel free to pm me or text if it would be easier, im available throughout the day...765-714-5070.
flyby video....
[nomedia="http://www.youtube.com/watch?v=lvreXXI5zso&feature=related"]Procharged Mach 1 flyby - YouTube[/nomedia]
on kurgans dyno...
[nomedia="http://www.youtube.com/watch?v=xCLk3gT7UMk&feature=related"]Ryan dyno pull #2 - YouTube[/nomedia]
on brenspeeds dyno....
going to start at $16,000 and go from there.
basics: the car has 38,xxx miles on it and is on its second owner. all mods have been performed by the current owner.
engine:
-stock rotating assemly
-p1sc procharger tuned to 6.75lbs.
-ported intake
-42lb. injectors
-big single blade throttle body
-stage 1 frpp heads
-stage 2 comp cams with supporting springs and retainers
exhaust:
-bassani mid-lengths
-bassani O/R x-pipe
-bassani catback
...sounds amazing...:rockon:
suspension:
-h&r springs
-strange 10-way struts
-50/50 lakewood shocks
-adjustalble rear lower control arms
-4-bolt c/c plates
rearend:
-full spool
-4.10s
-33-spline axles
-big wheel studs
-girdled
misc:
-dual focus pumps
-17in. cobra style wheels...17x9 and 17x10.5
-steeda based shifter with pro 5.0 handle
-stock clutch
-autometer a/f and boost guages mounted on the a-pillar
the car was tuned in 2009 by kurgan when they were still in chicago. the initial dyno pull yeilded 531whp and was detuned for obvious reasons. the current tune put down 494whp and 430wtq and has ran flawlessly that way since. it has been down the track a few times too. the quickest its been is 11.8 at 125. its a great streetcar that has made several roadtrips with no problems. the a/c still blows cold. the only thing that has gone bad was the radiator fans last summer, aside from that it is kind of a freak of nature. the body is in pretty good shape. there is a dent above the passenger rear wheelwell that is not very noticeable with the car being white. i dont have too many pics but there are a few and a flyby video of the car below. feel free to pm me or text if it would be easier, im available throughout the day...765-714-5070.
flyby video....
[nomedia="http://www.youtube.com/watch?v=lvreXXI5zso&feature=related"]Procharged Mach 1 flyby - YouTube[/nomedia]
on kurgans dyno...
[nomedia="http://www.youtube.com/watch?v=xCLk3gT7UMk&feature=related"]Ryan dyno pull #2 - YouTube[/nomedia]
on brenspeeds dyno....
Last edited:
