FS: BADDEST C4 vette on the planet over 100k invested

97 Red Devil

Member
Established Member
Joined
Mar 22, 2010
Messages
132
Location
nj
This is just a feeler not 100% sure but I'm thinking about selling this beast to get a nissan gtr. All the car needs is a tune that's it. Over 100k invested built with no expense spared and with the intention to make 1k - 1100rwhp on boost and juice while still being a true street car. With out a doubt the most extreme c4 and the nicest looking also. This is my 4th vette and I'm no stranger to these cars and know what they are capable of. I had an 03 z06 730rwhp, 06 z06 580rwhp, 99 frc 1006 rwhp, and this. By far this is the best built and you can feel how effortlessly the car revs and makes power. The combo of the high reving 377 (7400 rpm) and Ysi is insane. Thinking about literally throwing this car away for $16,000 which is literally a once in a life time opportunity for some one to get an insane car like this at that price. Only selling for so cheap because that's what I'm short on for a gtr. If seriously interested pm or email me [email protected] will get pictures up soon

1991 corvette with 96 side gills
car was re painted steel blue and the paint is 8-9 out of 10

some of a very very long list of mods

377 dart little m block
eagle crank & rods
je pistons
afr hydro rev kit
crane 1.6 gold race roller rockers
msd ignition
afr heads that have been further cnc'ed
custom comp blower cam
all arp fastners and studs
tpis mini ram intake that has been cnc'ed
8 qrt canton oil pan
custom canton tank for meth

custom Ysi blower set up
methonal injection
150 shot nx Gemini nitrous kit with nitrous computer

full return fuel system to support 1000 hp

stay alone accel dfi computer, I'll include the toshiba lap top with all tunning software

black tag zf6 trans
duel disk mccloud clutch and fly wheel
custom nitrous ready half shafts and drive shaft

5 point cage
boost, afr, temp, tach and shift light
b&m shifter

drm coil overs
baer big brake kit for and rear
fikse fm5 custom forged wheels
18x11 rear
18x9 front
custom 3 inch exhaust

a ton ton more that I don't feel like listing now but will go over with any interested parties.... Btw the car sounds insane ! !!
 

97 Red Devil

Member
Established Member
Joined
Mar 22, 2010
Messages
132
Location
nj
As I said I'll throw up pics probably tomorrow... Nope haven't got a chance to properly tune it. Just have it running safe/ rich on low boost which put down around 530rwhp on mustang dyno letting off at 5k rpm
 

97 Red Devil

Member
Established Member
Joined
Mar 22, 2010
Messages
132
Location
nj
I will try and get some pics up tonight . Here's alittle more detailed mod list



MOTOR
Destroked 400 with Dart little M block (377 CID)
All forged internals with dished JE pistons
ARP L19 bolts
V7 Vortech YSI supercharger race only head unit
Custom ASP 8 rib setup with 8" crank pulley
A/C delete with custom pulley tensioner in place (absolutely no slippage)
AFR 195 competition heads, CNC ported flows ~300cfm at .600 lift
1.6 RR
Beehive springs with titanium retainers
AFR Hydra Rev kit
TPIS Mini ram, ported
AZ S&M Monoblade
Custom Comp Cam 236/248 on 114LSA
canton 8qt pan
Accel DFI gen VII with 2 bar MAP
wideband o2 with interior mounted gauge
Custom Snow Methanol injected with custom Canton Billet tank
Moton 60lb injectors
Battery relocated to rear passenger compartment
Battery Kill switch
Custom fuel system with 8AN feed
Mallory 1000hp External fuel pump
Kenne bell boost A pump
Custom nitrous system jetted for 150 shot (NEVER USED on this motor)
Hooker 1 3/4 header with true dual 3" exhaust

Drivetrain
Mcleod clutch with aluminum flywheel
Black label ZF6
Custom steel drive shaft
Custom steel half shafts
B&M ripper shifter
cryo treated Dana 44 with 4.10 viper gears

Brakes
Baer 13" track kit
Baer Eradispeed 2pc rotors
SS lines
Bias spring


Suspension
DRM coilover suspension
Painted Steel Blue color 5 pt roll cage with driverside swing out bar
Z07 front sway bar
Poly bushings all around
You won't find a better handling C4 out there. Absolutely no squeaks or rattles.


Wheels/tires
18x8.5 Fikse FM5 Front
255/35/18 Kumho 712
18x11 Fikse FM5 Rear 85% tread
315/30/18 Pirelli P-Zero Corsa
 

97 Red Devil

Member
Established Member
Joined
Mar 22, 2010
Messages
132
Location
nj
image_zpscsfdqzan.jpg
"]
image_zpscsfdqzan.jpg
[/URL]
 

Attachments

  • image.jpg
    image.jpg
    73.1 KB · Views: 2,459

97 Red Devil

Member
Established Member
Joined
Mar 22, 2010
Messages
132
Location
nj
image_zpszua2sbos.jpg
"]
image_zpszua2sbos.jpg
[/URL]
image_zpspf4bfkvb.jpg
"]
image_zpspf4bfkvb.jpg
[/URL]
image_zpsfuqflplo.jpg
"]
image_zpsfuqflplo.jpg
[/URL]
image_zpscrjyidlk.jpg
"]
image_zpscrjyidlk.jpg
[/URL]
image_zpsuzsxjolm.jpg
"]
image_zpsuzsxjolm.jpg
[/URL]
image_zpsx1ipdzbs.jpg
"]
image_zpsx1ipdzbs.jpg
[/URL]
image_zpsbiuyikig.jpg
"]
image_zpsbiuyikig.jpg
[/URL]
image_zpstrlfzal0.jpg
"]
image_zpstrlfzal0.jpg
[/URL]
image_zpstkrkh0nn.jpg
"]
image_zpstkrkh0nn.jpg
[/URL]
image_zpsribe73ko.jpg
"]
image_zpsribe73ko.jpg
[/URL]
image_zpsn7q3ineq.jpg
"]
image_zpsn7q3ineq.jpg
[/URL]
image_zpsh3dokoin.jpg
"]
image_zpsh3dokoin.jpg
[/URL]
 

97 Red Devil

Member
Established Member
Joined
Mar 22, 2010
Messages
132
Location
nj
Located in nj & the front lip is not on car anymore. Was way to low
 
Last edited:

Regulars520

Well-Known Member
Established Member
Joined
Dec 19, 2012
Messages
1,589
Location
Midwest
Have any receipts or paperwork to go with the car? Would you be interested in 13K if receipts show good? Interior pics?
 

03Cobranator

Member
Established Member
Joined
Oct 1, 2012
Messages
290
Location
York, PA
"No Expense Spared"... Yet it has an Eagle Crank and Rods..

Price is good.. but you have the car hyped up a bit.. GLWS.
 

97 Red Devil

Member
Established Member
Joined
Mar 22, 2010
Messages
132
Location
nj
"No Expense Spared"... Yet it has an Eagle Crank and Rods..

Price is good.. but you have the car hyped up a bit.. GLWS.
I have eagle rotating assembly in my 99 f1r car that made 1030rwhp then I shot it on top of that no problems, I also had eagle crank and Pistons in my 03z making 730rwhp that I beat the piss out of with no problems. Broke a Carrillo rod in my tt viper on dyno... Go figure lol........ I'm not frequently on the forum anymore, best way to get in contact with me is email ( [email protected] ) for anyone interested.... Someone is gonna get an insane car for a sick deal.
 

Black2010

Active Member
Established Member
Joined
Aug 8, 2011
Messages
580
Location
Round Rock, TX
Why did you let the FS thread at Corvette Forum die? - http://www.corvetteforum.com/forums/c4s-for-sale-wanted/3639740-fs-zelement-s-steel-blue-beast.html May be a good idea to take some new pics as well. Those are 5+years old now.

That car is a legend over there. It has a much better chance of selling there than here. For those interested in this car. This was owned by a member on the corvette forum know as "Zelement". This car was THE car to have back in the day.

***I am not vouching for this seller though as I don't know him. Here is the FS thread for the car when Zelement sold it. http://www.corvetteforum.com/forums/c4s-for-sale-wanted/3639740-fs-zelement-s-steel-blue-beast.html
 

Users who are viewing this thread



Top