FS: Advan Racing Model 5 - full set 5x114.3 19x8.5 +36 offset - $1800obo shipped

turka

not ᶠᶸᶜᵏᴵᴺᴳ bagged
Established Member
Joined
Nov 17, 2011
Messages
309
Location
Backroads, VA
Have a complete set of Advan Racing Model 5 wheels

Very rare and discontinued lightweight forged wheels that are made in Japan that will work on many cars such as rx7, rx8, 350z, 300zx, 240sx, mazdaspeed3, mustang, cobra, sentra, maxima, genesis, corolla, civic, accord, etc with 5x114.3 lug pattern.
These retail for over $700 so keep that in mind before you think of lowballing.

Brake clearance is very good and will clear most big brakes (clears mustang brembo's too) without the need for a spacer.
Would make for great spares or just to daily on as I have been.

5x114.3 lug pattern
19x8.5 square setup
+36 offset all around
Have all original center caps even though 2 aren't installed in the pics
No tires


All wheels have some curb rash and nicks here and there but nothing major.
One wheel has a very slight bend that can easily be fixed.
Can't even feel the bend when wheel is on the car. No cracks. No air leaks. Nothing.

The bend can be seen in the 1 o'clock position in the first pic below
o0OxVZB.jpg

fmhwb1H.jpg

1UVHbuz.jpg


$̶1̶6̶0̶0̶ $1300 obo SHIPPED
Located in Northern VA

honda toyota ford nissan mazda kia hyundai jdm forged advan yokohama model5 t5 racing
 
Last edited:

20lbbooster

Member
Established Member
Joined
Nov 1, 2013
Messages
444
Location
Humble
I'm not talking about being staggered...8.5" is just not very wide for an aftermarket wheel on these cars. 9"+ is much more common on these cars.

The JDM crowd may pay $1800 but in mustang land JDM doesnt hold much water.
 

turka

not ᶠᶸᶜᵏᴵᴺᴳ bagged
Established Member
Joined
Nov 17, 2011
Messages
309
Location
Backroads, VA
Should've known I'd have to point this out on this forum..... But, as with all wheels, they can be fixed and widened. The weight and rarity on these make them an attractive option for those running stock wheels as your tires can be directly swapped over (as I did with mine off my brembos) and rotational mass greatly decreased.

Also, the price is obo.

anigif_enhanced-buzz-15282-1342465300-4.gif
 
Last edited:

_Snake_

Well-Known Member
Established Member
Joined
Jan 21, 2014
Messages
3,685
Location
Flo-Rida
Should've known I'd have to point this out on this forum..... But, as with all wheels, they can be fixed and widened.


But you didn't factor in the price to fix and widen these.

You should have known we'd expect that on this forum.

.
 
Last edited:

Users who are viewing this thread



Top