2003 Mach1 1. 29,000 miles.
Has every mod possible for a great looking 11.1 car.
All it needs is a new stroked short block and it will be running in the 10s. Will deliver car if a reasonable distance. $19K firm
ENGINE AND DRIVETRAIN
Custom catback system with race mufflers and electric cuts
Kooks Long tube headers with OR X
MRT hood struts
JLT RAI w/C&L 85 MAH and Steeda filter cover
3/4" intake spacer
FRPP Coil Covers
Accell COPS
Ported and polished upper and lower intake manifold by Orange blast
Diablo predator handheld tuner
Accufab Throttle body
160 T-stat
Even Flow Cooling Mod
Mez Electric Water pump
Alum coolant overflow tank
Optima Blue battery with Billet tray and rear trunk mount with battery chargers through tail light
Engine Billet:
Coolant cap, power steering cap, window washer cap, master cylinder cap and fuse box cover and extra deep Alum Tranny pan
NX Kit:
EFI kit, window switch, fuel pressure gauge, bottle heater, bottle opener, purge and 310lb bottles and custom hidden switches in arm rest.
SUSPENSION
SLP Linelock
Steeda Bumpsteer kit
Maximum Motorsports steering rack bushings
Bear Decelarotor Brake rotors front and rear
Steeda rear Adjustable Upper Control Arms
Maximum Motorsports adjustable Lower control Arms.
Tokico Dspecs shocks and struts
Maximum Motorsports Caster Camber plates
Maximum Motorsports Full length sub frame connectors
Summit Racing upgraded front and rear sway bars
New GT brakes on the from and now pad a=on all 4 corners
FRPP 4.10s
Strange hardened 28 Spline axles
New Race strong Eaton limited slip unit.
Alum Differential Cover
FRPP Alum Driveshaft & Drive shaft look
Ebach Race launch spring front and rear with an airbag in left rear
INTERIOR
MRT Gauge cluster,
Dimmer switch - Autometer
2 gauge cluster bezel
Lunar oil pressure and water temp gauges
Steering wheel gauge pod
AEM Wideband gauge
FRPPs upgrade steering wheel
Interior Billet:
Door lock pins, headlight knob, cruise control buttons, window/lock buttons, AC buttons, door handles, brake handle, cig. Lighter
Rear Seat Delete
4 point rollbar
CDC Mach1 floor mats
FRPPs floor mats - 2 sets
MGW Auto shift handle
Corbeau racing seats
Kenwood double-din audio system with amplifier, Polk speakers and amplified Alpine sub and backup camera
EXTERIOR
Carbon Fiber Mach1 Hood
Carbon Fiber rear decklid and 03/04 cobra spoiler
01 cobra Sequential tail lights
Black/Polished Alum Gas door
03/03 Cobra side skirts –Paint to match
03/04 Cobra folding side mirrors – Paint to match
01 Cobra front bumper – Paint to match
Spare wingless trunk lid. – Paint to match
Underside Grand Design trunk lid matt with Mach1 logo
Racestar black chrome drag race wheels and tires.-15X8s Mickey Thompson ET Street Radial Pro MTs & 15X6 Front skinny for the track.
AFS 17X9 and AFS 17X10.5 Mach1 Wheels with Goodyear F1s on all 4 corners for the street
Steeda Lugnuts
Has every mod possible for a great looking 11.1 car.
All it needs is a new stroked short block and it will be running in the 10s. Will deliver car if a reasonable distance. $19K firm
ENGINE AND DRIVETRAIN
Custom catback system with race mufflers and electric cuts
Kooks Long tube headers with OR X
MRT hood struts
JLT RAI w/C&L 85 MAH and Steeda filter cover
3/4" intake spacer
FRPP Coil Covers
Accell COPS
Ported and polished upper and lower intake manifold by Orange blast
Diablo predator handheld tuner
Accufab Throttle body
160 T-stat
Even Flow Cooling Mod
Mez Electric Water pump
Alum coolant overflow tank
Optima Blue battery with Billet tray and rear trunk mount with battery chargers through tail light
Engine Billet:
Coolant cap, power steering cap, window washer cap, master cylinder cap and fuse box cover and extra deep Alum Tranny pan
NX Kit:
EFI kit, window switch, fuel pressure gauge, bottle heater, bottle opener, purge and 310lb bottles and custom hidden switches in arm rest.
SUSPENSION
SLP Linelock
Steeda Bumpsteer kit
Maximum Motorsports steering rack bushings
Bear Decelarotor Brake rotors front and rear
Steeda rear Adjustable Upper Control Arms
Maximum Motorsports adjustable Lower control Arms.
Tokico Dspecs shocks and struts
Maximum Motorsports Caster Camber plates
Maximum Motorsports Full length sub frame connectors
Summit Racing upgraded front and rear sway bars
New GT brakes on the from and now pad a=on all 4 corners
FRPP 4.10s
Strange hardened 28 Spline axles
New Race strong Eaton limited slip unit.
Alum Differential Cover
FRPP Alum Driveshaft & Drive shaft look
Ebach Race launch spring front and rear with an airbag in left rear
INTERIOR
MRT Gauge cluster,
Dimmer switch - Autometer
2 gauge cluster bezel
Lunar oil pressure and water temp gauges
Steering wheel gauge pod
AEM Wideband gauge
FRPPs upgrade steering wheel
Interior Billet:
Door lock pins, headlight knob, cruise control buttons, window/lock buttons, AC buttons, door handles, brake handle, cig. Lighter
Rear Seat Delete
4 point rollbar
CDC Mach1 floor mats
FRPPs floor mats - 2 sets
MGW Auto shift handle
Corbeau racing seats
Kenwood double-din audio system with amplifier, Polk speakers and amplified Alpine sub and backup camera
EXTERIOR
Carbon Fiber Mach1 Hood
Carbon Fiber rear decklid and 03/04 cobra spoiler
01 cobra Sequential tail lights
Black/Polished Alum Gas door
03/03 Cobra side skirts –Paint to match
03/04 Cobra folding side mirrors – Paint to match
01 Cobra front bumper – Paint to match
Spare wingless trunk lid. – Paint to match
Underside Grand Design trunk lid matt with Mach1 logo
Racestar black chrome drag race wheels and tires.-15X8s Mickey Thompson ET Street Radial Pro MTs & 15X6 Front skinny for the track.
AFS 17X9 and AFS 17X10.5 Mach1 Wheels with Goodyear F1s on all 4 corners for the street
Steeda Lugnuts
Last edited:
