Front wheel splash guards mounting dilema

SRBCitrusCobra17

Member
Established Member
Joined
Nov 15, 2020
Messages
67
Location
Chandler AZ
Hello, I have these in a tote that were never installed after the build last summer. I believe these are splash guards that mount front of the wheel well. The problem I have is I dont see where/how they mount. There are three push pins still attached to each of theme. Yes this feels a bit silly. Does anyone happen to have a good pic of their front wheel well with the wheel removed with a good picture of these mounted. I would like to put them back where they are supposed to be. Thanks in advance.

1741229883858.png
 

03' White Snake

Well-Known Member
Established Member
Joined
Feb 5, 2007
Messages
4,245
Location
Mass
The 2 rounded holes go around the sway bar. I remember 1 of the tabs rested inside the front bumper near the H/E. I would start looking in that area for the push pins to line up to some holes. I don’t run these on my car anymore.
 

SRBCitrusCobra17

Member
Established Member
Joined
Nov 15, 2020
Messages
67
Location
Chandler AZ
Thanks I did try that when I had the wheels off for a different issue. Will take a closer look next time. Not critical that they go back on since it don't drive it in the rain.
 

wckdvnm

Well-Known Member
Established Member
Joined
Aug 10, 2015
Messages
1,371
Location
Kingman, AZ
IMG_1872.JPG


I just snapped a quick pic of the passenger side mounting location.
The right of pic is the front end. The middle most hole wraps up and goes behind the frame rail slightly.

Guess it’s good I have my fenders off and hand’t taken those off yet.

If you need more I can try to snap some pics when I get more time tomorrow.
 

SRBCitrusCobra17

Member
Established Member
Joined
Nov 15, 2020
Messages
67
Location
Chandler AZ
Thanks for the pic, this helps. Interesting it looks like it mounts from the inside, maybe they are a real pain in the ass to install, hence why they were not put back on the car. I guess I will find out.
 

wckdvnm

Well-Known Member
Established Member
Joined
Aug 10, 2015
Messages
1,371
Location
Kingman, AZ
Thanks for the pic, this helps. Interesting it looks like it mounts from the inside, maybe they are a real pain in the ass to install, hence why they were not put back on the car. I guess I will find out.

The rear most mount is inside of that frame rail. The middle one goes straight to the bottom of the rail.
 

Users who are viewing this thread



Top