Found the source of the noise in the cobra.......

[slosnake]

Well after believing I heard the knock coming from the tranny, I pulled it today, and low and behold....

Sent from my SM-G930T using the svtperformance.com mobile app

 

[SID297]

Looks like you need some bread.

 

[96GT226410]

Looks like you need some bread.

First time I saw that I was in shock. Ha ha...

Sent from my SM-N960U using the svtperformance.com mobile app

 

[Coosawjack]

I always use the Oilite Bushings and never had that problem.......bearings seem to fail frequently and sometimes even grab the input shaft which makes for some real FUN!!

 

[me32]

I always use the Oilite Bushings and never had that problem.......bearings seem to fail frequently and sometimes even grab the input shaft which makes for some real FUN!!

Lubrication maybe the issue

 

[Tabres]

I always use the Oilite Bushings and never had that problem.......bearings seem to fail frequently and sometimes even grab the input shaft which makes for some real FUN!!

I don't know that you can blame that failure on the bearing. The way it is wedged in there, I would guess the trans was forced/pulled into place when not lined up correctly, initially. That would be awful strange to get wedged like that just from the bearing failing.

 

[Coosawjack]

They can get REAL HOT when they fail.....anything is possible!!

 

[slosnake]

Lubrication wasnt the issue.... the reason for the pilot bearing failure was the "mechanic" and I use that term lightly, forgot to put the seperator plate back in.... smdh.

Sent from my SM-G930T using the svtperformance.com mobile app

 

[slosnake]

I have a pilot bearing puller attachment for my slide hammer. I do a pilot bearing with any any every clutch job I do...

Sent from my SM-G930T using the svtperformance.com mobile app