Fore Fuel Return Fuel system issue

TX_Hoonin

New Member
Established Member
Joined
Feb 7, 2017
Messages
22
I've just installed a Level 4 Fore Return system in my 2012 GT500. I wired the FC3 controller and the Bosch relay exactly like Fore instructed but my pumps will not power up with ignition. I contacted Fore and they sent me instructions to revise my tune. My tuner made those revisions and the pumps still will not power with ignition on. I have run a jumper wire from the power cable to remote 1 on the FC3 to power my pumps. Does anyone here have experience with a Fore install on a 2011-2012 GT500 or have pics of their install that could share. Any input or advice would be appreciated.
 

sleek98

Well-Known Member
Established Member
Joined
Nov 19, 2012
Messages
2,169
Location
Kansas City, MO
Tie into pin 5 yellow and grey. That's how I have it setup on my 2012

Dont use pin 1 or pin 3 as it doesnt put out enough voltage to keep the pumps on. The pumps will flutter on and off.
 

Attachments

  • IMG_0628.PNG
    IMG_0628.PNG
    246.2 KB · Views: 208

TX_Hoonin

New Member
Established Member
Joined
Feb 7, 2017
Messages
22
Tie into pin 5 yellow and grey. That's how I have it setup on my 2012

Dont use pin 1 or pin 3 as it doesnt put out enough voltage to keep the pumps on. The pumps will flutter on and off.

Thank you for the reply, did you tap that wire at the FPDM or at the fuel pump plug?
 

Users who are viewing this thread



Top