Just installed racing brakes rotors and pads and went through the brake bedding process.
One thing I've noticed (besides that they are noisy as hell) is that the rears don’t seem to be bedding correctly. The face of the rotor should be showing about 41mm of surface where the coating is removed, but I only get about 3/4 of that.
Pads look to be the same dimensions as stock. Calipers were working fine before with the stock stuff and showed correct depth of rotor face contact as far as I can tell.
Any thoughts?
Sent from my iPhone using the svtperformance.com mobile app
One thing I've noticed (besides that they are noisy as hell) is that the rears don’t seem to be bedding correctly. The face of the rotor should be showing about 41mm of surface where the coating is removed, but I only get about 3/4 of that.
Pads look to be the same dimensions as stock. Calipers were working fine before with the stock stuff and showed correct depth of rotor face contact as far as I can tell.
Any thoughts?
Sent from my iPhone using the svtperformance.com mobile app
Last edited: