Finally! I'm still pinching myself.

svtaddict

Active Member
Established Member
Joined
Apr 5, 2009
Messages
1,600
Location
Utah
20150219_211923_zps5ld9izxt.jpg


I'm so excited And I just can't hide it. Haha just had to tell someone and who better than all my svt peeps.
 

svtaddict

Active Member
Established Member
Joined
Apr 5, 2009
Messages
1,600
Location
Utah
I just need injectors now also for now I'm just gonna run 17lbs and 91 Until funds permit an e85 fuel system. So if someone has a screaming deal on 60 or 80lb injectors please let me know I'm trying to slap this on before knotts.
 

cj428mach

Well-Known Member
Established Member
Joined
Sep 21, 2012
Messages
7,609
Location
Kansas
Make sure you go with 80's or some other e85 compatible injector. If not you'll be removing the blower to swap in the injectors later.
 

svtaddict

Active Member
Established Member
Joined
Apr 5, 2009
Messages
1,600
Location
Utah
I'm hoping to find 80s but at this point I just want it on.its been a long time coming
 

AMWill

Active Member
Joined
Apr 12, 2012
Messages
1,008
Location
Malvern, PA
20150219_211923_zps5ld9izxt.jpg


I'm so excited And I just can't hide it. Haha just had to tell someone and who better than all my svt peeps.

:rockon: Now this looks like it can get interesting!

Congrats on the pickup SVT!

How much power are you going to be happy with? This bad-boy can make plenty!

Let me know if you had any questions!

- Will
 

svtaddict

Active Member
Established Member
Joined
Apr 5, 2009
Messages
1,600
Location
Utah
I'm hoping with 600 but will be happy with at least 575. My big question is if I put on a 3.00 inch pulley will I see 15 psi with my longtubes and high flow cats with stingers? If so will it be the same 15 psi that I will get from a 3.25 pulley? Or will both combos have different timing etc. I've heard longtubes drop about 1.5 psi. So in theory should I see 15.5 on a 3.00 inch pulley?
 

Users who are viewing this thread



Top