FGT PCV System Routing

2011SVT

"Oderint Dum Metuant"
Established Member
Joined
Feb 13, 2010
Messages
155
Location
Columbus, OH
Can anyone shed light on how these are plumbed with the dry sump? Even a description would be helpful but if you've got the page from the service manual that would be awesome.

Much appreciated.

Thanks!

- Chuck
 

jcthorne

New Member
Established Member
Joined
Mar 17, 2006
Messages
894
Location
Houston, TX
Can anyone shed light on how these are plumbed with the dry sump? Even a description would be helpful but if you've got the page from the service manual that would be awesome.

Much appreciated.

Thanks!

- Chuck

Valve cover to super charger inlet, behind throttle body. Many have added oil vapor catch cans to keep the SC and intercooler clean.
 

Sinovac

New Member
Established Member
Joined
May 24, 2008
Messages
80
Location
Largo
The dry sump on the Ford GT does not change the PCV system from the one found on the GT500. The driver's side is orientated as JCthorne stated. The passenger side hose goes directly into the supercharger on the end nearest the throttle body, just like the GT500. Also, just like all other mod motors, virtually all of the oil entering the intake comes from the passenger side. Hope this helps.
 

Users who are viewing this thread



Top