2003 Black Mustang Cobra 600rwhp
$30,000 OBO
32k and some change original miles
Has always been garage kept.
Extremely clean inside and out.
COBRA just sits and i never use it, might as well sell it and someone else can enjoy it.
Contact Bill @ 412 651 1920 phone or text
Venetia, PA 15367 (South of Pittsburgh, Pennsylvania)
Engine
MMR 1000 5.0 Stroker short block dynoed at 600rwhp/545 torque on 15lbs of boost, 93 pump fuel
Under 3k miles on engine
-18cc forged Manley pistons
Manley h-beam rods
ARP mainstuds, headstuds, and rod bolts
BB&T did Valve job, new seals, guides, and springs and decked heads .001
2.2 Kenne Bell Blower (3.5 upper pulley)
Accufab/KB Throttle Body
60lb Simmens injectors
KB boost-a-pump with upgraded wiring
EGR deleted
PPRV delete
KB FRPS disc
New Fuel Filter
Correct alternator size pulley
New blower and engine accessories belts
Metco lower pulley kit (4lbs lower)
Billet flow 4 piece idler kit
Thump tensioner, zero belt slip
JLT CAI
JLT Catch Can (black anodized)
Radiator cover (powder coated)
PLX wideband system
Autometer boost, water temp, and oil pressure gauges
Raptor shift light
Optima Red Top battery
Tuned for 93 pump gas
Cooling
LFP heat exchanger
Upgraded hood vents
LDC head cooling mod
Lethal Performance oversized tanks (powdercoated black)
Driveline
Steeda Tri-Ax Shifter, Bob's gaskets
McLeod twin disc clutch with Aluminum flywheel
Billet throwout bearing retainer
Liberty 26 spline input shaft
Firewall adj and quadrant
Billetflow IRS brace
3.55 rear gear
MM IRS poly busings on IRS rear
MM subframe connectors with seat brackets
Driveshaft loop
Aluminum driveshaft
SLP line lock
Exhaust
Bassani Mid length Headers with locking hardware
Bassani off road X-pipe
Loudmouth stainless mufflers
Fully polished tail pipes
Suspension/Wheel and Tire
Tociko adj. struts/Bilstein shocks
Saleen front lowering springs
Racing lowering springs in rear with airbags, zero wheel hop
HRE C100 3 piece wheels 18x9, 18x11.5 $6,400 just for the wheels.
275/35-18 Nitto 555 (front)new
315/30-18 Nitto DRs (rear)new
MM caster camber plates
Baer drilled/slotted rotors
Wagner Thermaquiet brake pad
All lights and emblems blacked out.
All out side lighting LED and sequential tails.
Theme of the Cobra is gloss black and flat black.
Redline hood struts
I have all engine and SVT papers except the window sticker and glove box Manuels
Perfect interior, 3rd brake light and lower front lip. All windows tinted. Car needs nothing and can drive anywhere, any distance.
Original paint, clean title and car fax. Paint is 9 out of 10, few rock chip marks on front bumper. Never been drilled for a front plate.
All fluids just changed/serviced
Probably forgetting stuff.
$30,000 OBO
32k and some change original miles
Has always been garage kept.
Extremely clean inside and out.
COBRA just sits and i never use it, might as well sell it and someone else can enjoy it.
Contact Bill @ 412 651 1920 phone or text
Venetia, PA 15367 (South of Pittsburgh, Pennsylvania)
Engine
MMR 1000 5.0 Stroker short block dynoed at 600rwhp/545 torque on 15lbs of boost, 93 pump fuel
Under 3k miles on engine
-18cc forged Manley pistons
Manley h-beam rods
ARP mainstuds, headstuds, and rod bolts
BB&T did Valve job, new seals, guides, and springs and decked heads .001
2.2 Kenne Bell Blower (3.5 upper pulley)
Accufab/KB Throttle Body
60lb Simmens injectors
KB boost-a-pump with upgraded wiring
EGR deleted
PPRV delete
KB FRPS disc
New Fuel Filter
Correct alternator size pulley
New blower and engine accessories belts
Metco lower pulley kit (4lbs lower)
Billet flow 4 piece idler kit
Thump tensioner, zero belt slip
JLT CAI
JLT Catch Can (black anodized)
Radiator cover (powder coated)
PLX wideband system
Autometer boost, water temp, and oil pressure gauges
Raptor shift light
Optima Red Top battery
Tuned for 93 pump gas
Cooling
LFP heat exchanger
Upgraded hood vents
LDC head cooling mod
Lethal Performance oversized tanks (powdercoated black)
Driveline
Steeda Tri-Ax Shifter, Bob's gaskets
McLeod twin disc clutch with Aluminum flywheel
Billet throwout bearing retainer
Liberty 26 spline input shaft
Firewall adj and quadrant
Billetflow IRS brace
3.55 rear gear
MM IRS poly busings on IRS rear
MM subframe connectors with seat brackets
Driveshaft loop
Aluminum driveshaft
SLP line lock
Exhaust
Bassani Mid length Headers with locking hardware
Bassani off road X-pipe
Loudmouth stainless mufflers
Fully polished tail pipes
Suspension/Wheel and Tire
Tociko adj. struts/Bilstein shocks
Saleen front lowering springs
Racing lowering springs in rear with airbags, zero wheel hop
HRE C100 3 piece wheels 18x9, 18x11.5 $6,400 just for the wheels.
275/35-18 Nitto 555 (front)new
315/30-18 Nitto DRs (rear)new
MM caster camber plates
Baer drilled/slotted rotors
Wagner Thermaquiet brake pad
All lights and emblems blacked out.
All out side lighting LED and sequential tails.
Theme of the Cobra is gloss black and flat black.
Redline hood struts
I have all engine and SVT papers except the window sticker and glove box Manuels
Perfect interior, 3rd brake light and lower front lip. All windows tinted. Car needs nothing and can drive anywhere, any distance.
Original paint, clean title and car fax. Paint is 9 out of 10, few rock chip marks on front bumper. Never been drilled for a front plate.
All fluids just changed/serviced
Probably forgetting stuff.
Last edited:
