external pump question

[whitemachine]

looking to run this external pump
MagnaFuel ProTuner Series - 2,000+ HP - MagnaFuel Pumps - Fuel Pumps - Fuel Delivery - 03-04 SVT Cobra

wondering if it will work for e85. i will be running -8 feed to DIVX fuel rails and ID1000 injectors and -6 return line not sure which regulator im going with yet but im hoping this pump will be plenty ill be pushing prob hopefully around 650 on blower and 750+ on spray

 

[whitemachine]

anyone???

 

[Z06KILLR]

I'm running a Weldon 2035 externally with a -8 feed and a -6 return, 160lb high imp. bosch injectors. No problems whatsoever. I dont have any experience with the magnaflow pumps. Does it have a way to control the pump so it's not full tilt all the time? (the weldon pumps have a controller that lowers the pulse of the pump, limiting its work and noise level until triggered by a WOT switch (hobbs). The 2000 hp rating is probably NA but should be more than enough for 750+.

 

[03mustang92]

Seems like the pump should work for e-85, the magnafuel 750 pump runs a whippled cobra just fine on 105lb injectors. That pump u show should be good up to 1300 on e85 as for a regulator i would just get this:
MagnaFuel Two-port EFI Reg. w/ 1:1 Boost Reference

 

[whitemachine]

awesome gonna pull the trigger tonight so when i get back from afghanistan ill put this and my sleeper sump tank in with my new 4r70w and see what she does thanks for the input