EPIC Turbo GT build #1

Eric@jpc

New Member
Established Member
Joined
Jan 23, 2012
Messages
1,443
Location
Beltsville, MD
So i thought i would share a new project we are working on

tony1_zps8b7a3daf.jpg


This is a 2014 GT M6 car

This customer came to us from about an hour west of St Louis.

Dropped off last friday night. We have been going back and forth for about a month now on getting a solid parts list and a Plan together.

So far on the ever changing list we have

Built Short Block (Diamond Pistons, Billet I beams, Darton Custom Sleeves)
JPC Turbo kit with Air to water Upgrade
80/83 Turbo with Billet wheel
4R70 Swap
Up Graded Fuel System
ID1300 Injectors
Suspension Including TRZ anti Roll bar and BMR K member among other options.

Basically we are looking for a bad ass street car here so we are keeping
Stock Brembo Brakes
AC
the whole 9

Dont plan on making this a total race car.

Any way she is under the knife now

tony2_zpsc29af65a.jpg


I will keep the thread updated with pictures as we go!!

Thanks for Looking
:beer:
 

Punisher1401

Member
Established Member
Joined
Jan 27, 2013
Messages
245
Location
Md
JPC has found the fountain of big money ballers!!!! soon eric and
gang wont have time for us little guys, LOL
 

JUIC3D

Boost Junkie
Established Member
Joined
Apr 24, 2011
Messages
2,551
Location
Florida
Looking good. I do love a SG Mustang.

Post up lots of pics for us regular folk :beer:
 

Eric@jpc

New Member
Established Member
Joined
Jan 23, 2012
Messages
1,443
Location
Beltsville, MD
the TX mile or TX2K14? if its the latter then you guys are in serious crunch mode.

2K

Yes we are in crunch mode

the engine is coming out today. We started the engine build a few weeks back so that should be ready late this week. worst case next week.

Since we just changed the turbo size yesterday i have that on order so we are getting right to it on this build
 

poof100

Member
Established Member
Joined
Oct 26, 2012
Messages
863
Location
VA
Looking good. I do love a SG Mustang.

Post up lots of pics for us regular folk :beer:

They have another SG GT waiting in the wings for a similar build as well. In fact, 90% of the 5.0s up there now are SG. lol.

Badass build, can't wait to see it done! :rockon:
 

chao5.0

Well-Known Member
Established Member
Joined
Mar 5, 2012
Messages
1,106
Location
Conroe, Tx
2K

Yes we are in crunch mode

the engine is coming out today. We started the engine build a few weeks back so that should be ready late this week. worst case next week.

Since we just changed the turbo size yesterday i have that on order so we are getting right to it on this build


if you guys from the shop make it down to 2K let us TX guys know I'm sure there are more than a few that would like to meet up with you guys.
 

Eric@jpc

New Member
Established Member
Joined
Jan 23, 2012
Messages
1,443
Location
Beltsville, MD
IMG_2356_zps3fb407e7.jpg


IMG_2357_zpsa4475a05.jpg


Got a 4R70 Mocked up so we can get a driveshaft measurement.

IMG_2359_zpsd87a511c.jpg


IMG_2360_zps34a6518f.jpg


Now we are popping the engine out!!! Say good by to the stock 14.
 
Last edited:

Fastnature

New Member
Established Member
Joined
Jan 8, 2013
Messages
282
Location
Hennessey, OK
Eric what do you think the lag will be like on the turbo you are using? How much will the 8083 turbo support vs the 7675 that supports 1200hp? Just looking for that extra edge over the 7675 without alot of lag.
 

Users who are viewing this thread



Top