• Welcome to SVTPerformance!

Epic Build Thread: CPr Single Turbo + MMR Pro Mod 1500 block with extras!!

Discussion in 'Power-Adders' started by notchy444, Dec 14, 2013.

  1. notchy444

    notchy444 New Member Established Member

    Messages:
    285
    Joined:
    Oct 26, 2012
    Location:
    San Diego, California, United States
    Finally pulled the trigger on my setup over the black friday/ cyber monday sales. Ended up selling my Paxton kit with extras to a SVTP forum member, He will put the kit to good use. My build is as following:

    Cpr Turbo kit (installed by the man him self Dustin at his shop in San Diego):rockon:
    MMR 1500 I beam Pro Mod block with new oil pump and gears
    New clutch going in (Rxt Mcleod twin disk with aluminum fly wheel)
    Ford racing 3.31 gears
    Boost controller (Eboost-2 soon to be AMS2000)
    Tuned on E85 with my 2500hp JPC triple pump return fuel system

    Goals:
    On the Mt82 780-830+ Hp to the wheels wanna hit the track on some slicks. Also beat up on some local car clubs.

    Later on (few months) Go full retard and turn the boost up, swap out the drive tran to a glide and make some stupid power and track numbers. Ill update this thread with pics over the next few weeks. We are pulling the Paxton out tomorrow along with pulling the motor over the next few weeks. Cant wait to get this thing going just need to wait on the engine to be built. :rockon:

    Final number are in on my 75mm, Shaun worked his magic and pulled some crazy power outta low PSI

    813rwh/ 695 ft/lbs 10 psi

    890rwh/ 800 ft/lbs 13 Psi

    935rwh/ 825 ft/lbs 15.5 spi

    All through my exhaust and air filter still on! This is just my test turbo setup till I figure out how the hell to put this power down! Air to water intercooler and a 84mm turbo is waiting for the auto swap!

    [video=youtube;3-ERG8DQApw]https://www.youtube.com/watch?v=3-ERG8DQApw[/video]

    3runs_zps130dc2d8.png

    Old Paxton setup 2200sl, JLT intake, Tourque booster Tial wastegate with 10 lbs spring vs 10 psi on my CPR 75mm turbo setup Same dyno

    turbovstorquebooster_zps6d21706d.png
     
    Last edited: Jun 13, 2014
  2. 04compgt

    04compgt Member Established Member

    Messages:
    800
    Joined:
    Nov 10, 2009
    Location:
    Florida
    I can't wait to see it done!!!
     
  3. hitmix300

    hitmix300 Member Established Member

    Messages:
    725
    Joined:
    Jan 8, 2013
    Location:
    detroit
    Awesome man just what I want to do. Definitely subbing for photos and progress
     
  4. SignalZero

    SignalZero Eat mor Chikin Established Member

    Messages:
    1,886
    Joined:
    Oct 18, 2012
    Location:
    Florida
    Rocks and sticks FTMFW!!! Can't wait to see how she does! :rockon:

    What size turbo you going with?
     
    Last edited: Dec 14, 2013
  5. mhyjek

    mhyjek Active Member Established Member

    Messages:
    1,037
    Joined:
    Jul 30, 2012
    Location:
    NJ
    Nice can't wait for results!
     
  6. notchy444

    notchy444 New Member Established Member

    Messages:
    285
    Joined:
    Oct 26, 2012
    Location:
    San Diego, California, United States
    77/92 Borg Warner Turbo
     
  7. manolith

    manolith I Wanna go fast. Established Member

    Messages:
    2,856
    Joined:
    May 6, 2011
    Location:
    miami
    Wow man that is going to be a disgusting setup. I would be extremely exited about it
     
  8. LT1Squirrel

    LT1Squirrel Member Established Member

    Messages:
    76
    Joined:
    Sep 29, 2010
    Location:
    NJ
    I think a nice c4 would be better, you can set up 3rd to trap 150 and still be drivable on the street
     
  9. notchy444

    notchy444 New Member Established Member

    Messages:
    285
    Joined:
    Oct 26, 2012
    Location:
    San Diego, California, United States
    I am extremely excited to start this build! I think im addicted to HP.. for the transmission, yeah its still up in the air. I still want to roll race so a 6r80 with a kung fu trans brake might be it.... Just depends on what comes out cheaper and can hold the power!
     
    Last edited: Dec 15, 2013
  10. Mad_Marc

    Mad_Marc Procharged! Established Member

    Messages:
    410
    Joined:
    Mar 13, 2013
    Location:
    CALIFORNIA
    NICE!!! Congrats! I am acutally in the middle of doing the same exact build lol, block was dropped off at MMR and got with Dustin about 2 weeks ago to figure out which route to go on his turbo and intercooler setup. Ill be heading down to San Diego to meet with Dustin around March.. Goodluck on the build :), you will propbably have yours done before mine as im still currently deployed.

    As for transmission, auto would def yield better track times, im considering the Magnum t-56. But a 6r80 would be tough to beat and should still drive really well if you have it as a daily

    Goodluck!
     
  11. notchy444

    notchy444 New Member Established Member

    Messages:
    285
    Joined:
    Oct 26, 2012
    Location:
    San Diego, California, United States
    Thanks dude! Dustin and I were just talking about ur build! I think hes gonna build our kits at the same time hahaha. Yeah I hope to be up and running by January and have some solid numbers by then. when you come down to san diego hit dustin or me up and we can take our cars for a nice cruz or go out hunting hahah
     
  12. Blazer707@TBR

    [email protected] Master Ford Tech Authorized Vendor

    Messages:
    4,313
    Joined:
    Aug 19, 2012
    Location:
    Bay Area
    This build is going to be insane!!
     
  13. Mad_Marc

    Mad_Marc Procharged! Established Member

    Messages:
    410
    Joined:
    Mar 13, 2013
    Location:
    CALIFORNIA

    Thats awesome, yea man I will def hit you up... Shaun will be tuning it so dont know how much hunting we can do haha.. but after its tuned im only a few hours away from you and i go down to Long Beach alot so ill have to start making trips out to SD more often lol..
     
  14. streetone01

    streetone01 SVT Established Member

    Messages:
    330
    Joined:
    Sep 15, 2007
    Location:
    mass
    c4 at that power level and weight.
     
  15. Scuba-Matt

    Scuba-Matt Boost Freak!!!!!!!! Established Member

    Messages:
    8,542
    Joined:
    Jan 23, 2005
    Location:
    South East Florida
    Wow your going to have a nasty set up when finished. Post up results when it all finished. Good turbo set up's coming out of CPR.
     
  16. blackbeast12

    blackbeast12 Dr. Frankenstang Established Member

    Messages:
    3,929
    Joined:
    Apr 30, 2012
    Location:
    Delaware
    You sure you wanna throw over 800 hp at an mt-82? Your asking for trouble there. Svt member poof has a Tremec for sale. Save yourself the trouble, and money to!
     
    Last edited: Dec 15, 2013
  17. numbnutz

    numbnutz New Member Established Member

    Messages:
    594
    Joined:
    Apr 13, 2013
    Location:
    So Cal
    Gonna be sick. :rockon:
     
  18. 4VFTW

    4VFTW Well-Known Member Established Member

    Messages:
    1,843
    Joined:
    Jan 16, 2013
    Location:
    South Florida
    for 2 passes.

    Why do people think PG's are not streetable? they came from the factory in every Chevy product for 20yrs.
     
    Last edited: Dec 15, 2013
  19. 90goldtsiawd

    90goldtsiawd here 4 da laffs & cruelty Established Member

    Messages:
    7,410
    Joined:
    Jun 12, 2006
    Location:
    NJ
    God I need your guys' money.... Should be a monster... Guess beefcake couldn't make you happy huh?
     
  20. 1NA RUN

    1NA RUN New Member Established Member

    Messages:
    461
    Joined:
    Dec 9, 2012
    Location:
    Fort Lauderdale
    Sounds like a great set up.
     

Share This Page