E85 on pullied/ported eaton

[VETTEKIL]

Would a bap and 60lbs injectors, larger maf be enough to run e85 on stiegemeier ported blower with 2.76 pulley?

 

[Rambro]

No you need to upgrade pumps.

 

[BLOWN9646]

And injectors, wiring, and possibly -8 fuel line

 

[R.D.P.]

Injectors would need to be at least 80's and you would need larger pumps. Not sure on the line.

 

[Rambro]

Timspony ran 10.70's with his posi port/e85 combo. I pretty sure all he had was GT pumps w/BAP, single modified FPDM, and 60's, stock feed and rails. This was a 2.76/4 pound lower posi port. But yeah, every car is different but his car makes for a nice reference to start from.

 

[JeremyH]

What is boost level and power?

 

[87pony]

Did u pull the e85 trigger with ur combo?

 

[Shadow Grey 03]

Timspony ran 10.70's with his posi port/e85 combo. I pretty sure all he had was GT pumps w/BAP, single modified FPDM, and 60's, stock feed and rails. This was a 2.76/4 pound lower posi port. But yeah, every car is different but his car makes for a nice reference to start from.

I ran the same setup, but with 80s. 2.9/6lb lower Posi eaton. 550/575. 10.76 on drag radials with a best trap of 131.72. Solid setup.