E85 Conversion Question!

[Luis04R]

So I want to convert my car to run E85.
Uninstalled Parts:

Currently I have Division X Fuel Hat
Return Style Wiring Harness Lethal
465 Dual Pumps
Fuel Lines from Lethals 1400 Return Style (Old Version)
80# Injectors.

What else may I need to run E85 Safely?
Is this enough to run E, is there something else I should get? Filter? Regulator? Rails?



Any info would be appreciated. Thanks!

 

[01yellercobra]

From what I've seen that should cover it. I did rails on mine just so I wouldn't have to mess with them at a later date. But plenty of guys on here make big power with stock rails

 

[04OWwhipple]

Depends on how big you are going with boost/engine combo . So it is a return style system with factory fuel rails then? As long as the lines are E85 rated you should be good. I ran a return system with dual 465s, -8 feed line, -6 return line to the factory rails with 80# injectors and was making 710RWHP on E85.

 

[SVT Hess]

You will need a regulator and a fuel filter that’s rated for E85. Both that come in lethals 1400 kit should be fine.

 

[Luis04R]

Thanks so much guys ! I was really worried I needed something a lot more so I’ve been holding off installation but I’ll get the regulator and filter and get it installed ASAP and update you guys. Currently running Ported eaton

 

[NateDogg]

Like mentioned above... A regulator and fuel filter. Relocate the fuel filter for ease of changing/cleaning..

e85 is liquid gold.

 

[03' White Snake]

Sounds ready to me. Similar parts I am running.

Later, look into -an lines for return and feed. I run -10 feed and -8 return. My base pressure is at 58 psi and I am making near 800 hp with 80's.

 

[Luis04R]

Sounds ready to me. Similar parts I am running.

Later, look into -an lines for return and feed. I run -10 feed and -8 return. My base pressure is at 58 psi and I am making near 800 hp with 80's.

Wow that’s awesome . What blower are you running ?

 

[03' White Snake]

Wow that’s awesome . What blower are you running ?

2.8h KB with a built motor.

 

[Luis04R]

Going in this weekend finally after handling some expenses. Purchased aeromotive efi regulator and e85 micron filter.
Im hoping to break 530rwhp on ported eaton fbo/tune. What do you guys think?

 

[Dib14gt]

Going in this weekend finally after handling some expenses. Purchased aeromotive efi regulator and e85 micron filter.
Im hoping to break 530rwhp on ported eaton fbo/tune. What do you guys think?

Lmk how it all goes. I’m ported Eaton also looking at going E.