Dyno results

[Rob Smith]

Well 1st off I found out this whole time my T-rex wasn't working, the fuse holder was bad, so we replaced it. Then at 5000rpm, 10psi was blowing my spark out, so I'll be throwing on a 6A or crane. We tuned it to 5000, and it put down 389rwhp and 403 ftlbs. With 1250 more rpm, and some more ignition, I should hit my 400 mark. Air/fuel was set at 11.7-1, with 17 degrees total timing.

 

[GR8WHITE]

Those are pretty good numbers. The 6AL and coil will really help you out with the spark. Just curious about the gap you were running on the dyno. Had you decreased it any?

 

[Rob Smith]

I gapped everything to .32-.35, so I didn't mess with it.

 

[NastyWS6]

Good #'s