Dyno results are in...home ported VMP TVS and more

1320 Junkie

Active Member
Established Member
Joined
Nov 25, 2009
Messages
7,675
Location
CT
K so to keep this into perspective and have legit comparison numbers we went in stages today...here's my street tune now vs pre ported vmp TVS and 3" stainless works catback

20131004_185102_zps518f55b7.jpg


20131004_191402_zpsa9292833.jpg

SUCCESS stage 1 !!!!

Stage 2 race tune...little to no cool down from race tune just a file load.

20131004_191419_zpsc33840a4.jpg


Cooled down for a good 35 min and rev'd it to 6300

20131004_195244_zpsc6f13899.jpg


CORRECTED NUMBERS old race tune #'s vs new race tune #'s

20131004_195653_zps1477783e.jpg


Just to show all preset values from mustang Dyno were properly loaded no bs trickery from my camp.

20131004_195749_zps8beb44b7.jpg



My tuner is sending me the vid from the 712 pull I'll post that tomorrow.

Thanks to my tuner Bill Miller @ Pro Edge Tuning for dialing in one bad ass Shelby...I can't wait to unleash her on oct 21 at the track on slicks !!!!
 
Last edited:

1320 Junkie

Active Member
Established Member
Joined
Nov 25, 2009
Messages
7,675
Location
CT
So you picked up 40/20 just from the port?

Yea...NO BOOST increase either...I decided not to even use the 2.4" pulley once we got to 700. I ported it myself with guidance from my good friend Jim Larocca.
 
Last edited:

Mr. Freeze

Active Member
Established Member
Joined
Aug 13, 2004
Messages
3,794
Location
south texas
what a/f ratio is it reading and how much boost did you see? Congrats again thats just plain awesome #'s!
 

1320 Junkie

Active Member
Established Member
Joined
Nov 25, 2009
Messages
7,675
Location
CT
what a/f ratio is it reading and how much boost did you see? Congrats again thats just plain awesome #'s!

Af is 11:4-11:7 across the board...19psi on my digital boost gauge in car for the 2.6 / 15% lower combo.the dyno reads boost higher than it is. A stock shelby like mine reads 11psi and we all know that's not correct lol.
 
Last edited:

ZOMBEAST

Killed by Death
Established Member
Joined
Aug 31, 2008
Messages
1,606
Location
North Jersey
That's an awesome improvment for just porting. Got any pics of what you did? I see Jim Larocca's name attached to quite a few kick ass TVS cars.
 

evolve

Well-Known Member
Established Member
Joined
Apr 22, 2009
Messages
2,782
Location
Cyber Space
Jeez. i have been curious about the potential benefits of porting an aftermarket blower (TVS and TS). Great results!
 

brian98svtsnake

Active Member
Established Member
Joined
Mar 21, 2007
Messages
4,618
Location
Monroe township, NJ
Wanna port my 13 plenum? I can bring it to the track rental. I've done this before on my 98 cobra intake but my bad back won't hold up to this anymore.
 

1320 Junkie

Active Member
Established Member
Joined
Nov 25, 2009
Messages
7,675
Location
CT
Wanna port my 13 plenum? I can bring it to the track rental. I've done this before on my 98 cobra intake but my bad back won't hold up to this anymore.

Isn't Jim close to you? I don't want to step on any toes. If he can't do it send me blower and plenum...I would port both..not just 1. The port matching is just as important as the tricks involved in gaining port volume.
 

1320 Junkie

Active Member
Established Member
Joined
Nov 25, 2009
Messages
7,675
Location
CT
That's an awesome improvment for just porting. Got any pics of what you did? I see Jim Larocca's name attached to quite a few kick ass TVS cars.

I do...unfortunately I didn't take any finished pics but I have some of the power producing area...the long and short turn radius'...ill upload them now.

20130910_212110_zpsded87079.jpg
 
Last edited:

brian98svtsnake

Active Member
Established Member
Joined
Mar 21, 2007
Messages
4,618
Location
Monroe township, NJ
Isn't Jim close to you? I don't want to step on any toes. If he can't do it send me blower and plenum...I would port both..not just 1. The port matching is just as important as the tricks involved in gaining port volume.

He lives 3 minutes away but he's done so much for me I hate bothering him. I'll ask him if he wants to do it and if he doesn't I'll bring my blower to the rental.
 

Venom07

Member
Established Member
Joined
Sep 24, 2012
Messages
145
Location
san antonio
Wow thats great to see. Cant wait to put my tvs on!!!! Great job!!!!
 
Last edited by a moderator:

1320 Junkie

Active Member
Established Member
Joined
Nov 25, 2009
Messages
7,675
Location
CT
He lives 3 minutes away but he's done so much for me I hate bothering him. I'll ask him if he wants to do it and if he doesn't I'll bring my blower to the rental.

He's a good friend of mine so last thing I'm doing is taking any $ out of his pocket. Reason I know what I do is because of him.
 

Users who are viewing this thread



Top