• Welcome to SVTPerformance!

cylinder numbering

Discussion in '2013-14 Shelby GT500' started by Cman01, May 30, 2016.

  1. Cman01

    Cman01 hello Established Member

    Messages:
    2,355
    Joined:
    May 25, 2012
    Location:
    Toronto
    Can someone confirm what I think is the cyl. numbering on the 5.8 engine?

    Cyl. on the pass. side are numbered front to back 1,2,3,4.

    Cyl. on the driver side are numbered front to back 5,6,7,8.

    TIA

    Tony
     
  2. Snoopy49

    Snoopy49 Well-Known Member Established Member

    Messages:
    6,448
    Joined:
    Jun 12, 2012
    Location:
    California
    From the 2014 Mustang Service Manual

    2013-14 GT500 Cylinder Identification.jpg

    I thought I would just throw this in.

    Firing order 1-3-7-2-6-5-4-8
     
    Last edited: May 30, 2016
  3. Black Thunder 715

    Black Thunder 715 Member Established Member

    Messages:
    528
    Joined:
    Mar 24, 2013
    Location:
    Tampa Bay
    Awesome. Even though I'm not the one asking for that info., thanks Snoopy.
     
  4. PhoenixM3

    PhoenixM3 Hello Kitty Slayer Premium Member Established Member

    Messages:
    3,509
    Joined:
    Jul 31, 2012
    Location:
    Colorado Springs
    ....and for anyone installing ARH 1 7/8 LTH, I shortened the following studs: Lower studs on #4, #7 and #8, and upper studs on #1 and #2. Shortened using a dremel tool w/ cutoff bit to achieve 4.5 cm in length (stock is 5.5cm). In hindsight, it is probably much easier to just replace those with new studs....
     

Share This Page