Current build

jenkins_1120

Well-Known Member
Established Member
Joined
Sep 22, 2011
Messages
2,002
Location
Melbourne, FL
So here's my current build going. Nothing to crazy. My kb 3.6 was making some weird noise so I sent it off to be inspected and they said nothing was wrong and it jus remade more noise due to the helical cut gears. He said it would be covered by Warranty if something happened to the blower. I told the tech I didn't care about the blower just the cost of the motor it's attached to.

Fuel system will be id1300, fore hat and pumps. From jason at hypermotive. Already had the lines and rails.

Did a few small things this week. Rerouted the ice tank lines, frpp tow point, engine oil,gear,trans and brake will be changed closer it gets to starting.

Trying to think if I missed anything. Here's some pics and I'll keep updating till it's tuned and track numbers.

256526c5a9fb39bc6005ca0fda5731c1.jpg

0ea63fb3c27ec46162ed43da297560d6.jpg

99d4eafd93119fbd42cdb191d8ddebac.jpg

76e4dfb133f9d6b358ac0686d6b0ff1d.jpg
09634ddbce4548b79dce67606aef5697.jpg

31efeee87a870fc6afdb3ac0ca52e39f.jpg

8af84f1df22a428fcd411ed13a33900d.jpg

ba5365b53047c1200965373cb3af68f6.jpg

6bcd07c735e0d1c70bcc6b66c1bab820.jpg

c25cf3c9e0bcf02ca02385210beb6a56.jpg





Sent from my iPhone using Tapatalk
 

jenkins_1120

Well-Known Member
Established Member
Joined
Sep 22, 2011
Messages
2,002
Location
Melbourne, FL
Also I've had bobs oil separators on the car since 4kish miles. With a kb 2.8 18lbs I'd 1000 and a 20v bap


Sent from my iPhone using Tapatalk
 

Users who are viewing this thread



Top